FLUKE 1742/1746/1748 (Model 1742/1746/1748) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 1742/1746/1748 — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Parameter | Range Maximum Resolution Reference Conditions under internal at Accuracy (of reading% + Range%) |
|---|---|
| Voltage | 1000 V 0.1 V Nominal Voltage ±0.1%1, 2 |
| Current: Connection Input | i17xx-flex 1500IP 24 1500 A 150 A 0.01 A(Minimum 1.5A)3 ±(1% + 0.02%) |
| Current: Connection Input 1500 A | 0.1 A |
| i17xx-flex 3000IP 24 3000 A | 300 A 0.01 A(Minimum 3.0 A)3 ±(1% + 0.03%) |
| i17xx-flex 3000IP 24 3000 A 3000 A | 0.1 A |
| i17xx-flex 6000IP 36 6000 A | 600 A 0.01 A(Minimum 6.0 A)3 ±(1.5% + 0.03%) |
| i17xx-flex 6000IP 36 6000 A 6000 A | 0.1 A |
| i40s-EL Current | 4 A 1 mA ±(0.7% + 0.02%) |
| i40s-EL Current 40 A | 10 mA |
| Frequency | 42.5 Hz to 69 Hz 0.01 Hz ±(0.1%)2 |
| Input | ±10 V DC 0.1 mV ±(0.2% + 0.02%) |
| Voltage Minimum Value / Maximum Value | 1000 V 0.1 V Nominal Input Voltage ±0.2%1 |
| Current Minimum Value / Maximum Value | by Accessories Setting by Accessories Setting ±(5% + 0.2%) |
| Voltage THD | 1000% 0.10% ± 2.5% |
| Current THD | 1000% 0.10% ± 2.5% |
| 2 to 50 Times Voltage | 1000 V 0.1 V ≥ 1 V: of reading ± 5% |
| 2 to 50 Times Current | by Accessories Setting by Accessories Setting ≥ Current Range 3%: of reading ± 5% |
| P LT, PST | 0 to 20 0.01 5% |
| Parameter | Quantity iFlex1500IP-24 iFlex3000IP-24 iFlex6000IP-36 i40S-EL |
| Parameter 150 A / 1500 A | 300 A / 3000 A 600 A / 6000 A 4 A / 40 A |
| with Power P | PF ≥ 0.99 1.2% + 0.005% 1.2% + 0.0075% 1.7% + 0.0075% 1.2% + 0.005% |
| at Power S | 0 ≤ PF ≤ 1 1.2% + 0.005% 1.2% + 0.0075% 1.7% + 0.0075% 1.2% + 0.005% |
| No Power Q | 0 ≤ PF ≤ 1 Measurement at Power 2.5% |
| Power Number PF | - ±0.025 |
| Its Not Accuracy Degree ( Range Percent Display) | V P-N>250 V 0.015% 0.023% 0.023% 0.015% |
| Voltage Range | Operating Safety Input Head via Measurement Electric Circuit Power Supply when is 100 V to 500 V |
| Power Consumption | Maximum is 50 VA(Operating MA-C8 Adapter Power Supply when Maximum is 15 VA) |
| Rate | ≥ 68.2%(Compliant with Energy Gauge ) |
| Maximum | < 0.3 W(only Operating IEC 60320 Input when) |
| Main Power Supply Frequency | 50 / 60 Hz ± 15% |
| Battery | Lithium-Ion Battery 3.7 V, 9.25 Wh( can Replacement) |
| Battery Power Supply Time | General Normal 4 hours |
| Charging time | < 6 hours |
| Resolution | 16 digits Same Sampling |
| Sampling Frequency | 50 / 60 Hz when is 10.24 kHz, and Power Supply Frequency Same |
| Input Signal Frequency | 50 / 60 Hz(42.5 to 69 Hz) |
| Connection Wire Method Type | 1- Φ, 1- Φ IT, Division Phase, 3- Φ three Angle , 3- Φ Y-, 3- Φ Y- IT, 3- Φ Y- Balance, 3- Φ Aron / Blondel(2 Element three Angle ), 3- Φ three Angle Open , only Current (Load ) |
| Data Storage | internal Part (User No Replacement) |
| Internal Capacity | Typical Value: 20 pcs is 4 , Interval is 1 minutes and 500 pcs pcs Recording |
| Measuring Parameter | Voltage, Current, Aux, Frequency, THD V, THD A, Power, Power Number, Wave Power, DPF, Electric Energy Quantity |
| Average Interval | 1 s, 5 s, 10 s, 30 s, 1 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes |
| Average Time Minimum / Maximum Value | Voltage, Current: per Half Period more New Full Wave RMS (URMS1 / 2 Compliant with IEC61000-4-30 Aux, Power: 200ms) |
| Measuring Parameter | Electric Energy Quantity (Wh, varh, VAh), PF, Maximum requires Quantity, Electric Energy This |
| Interval | 5 minutes, 10 minutes, 15 minutes, 20 minutes, 30 minutes, |
| Measuring Parameter | Voltage, Frequency, not Balance, Voltage Harmonic, THD V, Current Harmonic, THD A, TDD, Voltage Harmonic, TID V, Current Harmonic, TID A, , Power Supply Signal, above / under Deviation |
| Average Interval | with Parameter 10 minutes / 2 hours (Length Time PLT) / 150 / 180 pcs Period (3 s) Harmonic ( Software can IEEE519 / REPORT) |
| Each Times | 2 to 50 times Harmonic / According to IEC 61000-4-7 Division groups User can Configuration Depends on Application: groups (Harmonic + Harmonic), Division groups or only Harmonic groups |
| Specification | 1 to 50 times Harmonic |
| Total | per 50 times Voltage Harmonic Meter Calculation |
| Part | Voltage: , , in , Current: Current / 1748: Power Supply Signal, (Low ) |
| Trigger Recording | RMS Wire Diagram: per Half pcs Voltage and Current Period more New a times Full Period RMS Recording most Length 11 s(URMS1 / 2 Compliant with IEC 61000-4-30) |
| Current | RMS Wire Diagram at 1 / 2 Period RMS Trigger |
| Specification | Compliant with IEC 61000-4-15 and IEEE 1453 |
| Electric Wire Signal | two pcs User Setting Frequency, Maximum 3 kHz |
| PQ | at a pcs Gauge division in Total Power Quality Measured values. Provided per pcs Parameter Data |
| EN 50160 | Compliant with standard |
| Can Range PQ Extreme Limit Value | Operating Setting Extreme Limit Value Compliant with Place Standard |
| Specification | IEC 61000-4-7: 1 Class |
| Power Quality | IEC 61000-4-30 A Class, IEC 62586-1, IEC 62586-2(PQI-A-PI Device) |
| Power | IEEE 1459 |
| Power Quality | EN 50160 |
| Safety Class | a : IEC 61010-1: Pollution Degree 2 |
| USB-A | via U Disk Text pcs Transfer, pcs more New, Maximum Power Supply Current: 120 mA |
| WiFi | via Direct Connection or WiFi Text pcs Transfer and Range Control |
| Bluetooth | from Fluke Connect®3000 Series Reading Measurement Data (requires supports USB Rotation BLE Adapter or WiFi / BLE Adapter, Check Available Property) |
| USB-mini | will Data under to PC |
| Input Channel | 4 pcs (Phase to at Zero Wire three Phase Voltage) |
| Maximum Input Voltage | 1000 Vrms、CF 1.7 |
| Input | 10 MΩ |
| Bandwidth | 42.5 Hz to 3.5 kHz |
| Zoom | 1:1, can |
| Voltage Safety Class | 1000 V CAT III / 600 V CAT IV |
| Input Channel | 4 pcs (three Phase and Zero Wire), is Connection Sensor Automatic Selection Mode |
| Input Voltage | Current Clamp Input: 500 mVrms / 50 mVrms; Wave Series Number 2.8 |
| Range | Operating Property Current Probe i17XX-flex1500 IP 24 is 1 A to 150 A / 10 A to 1500 A |
| Bandwidth | 42.5 Hz - 3.5 kHz |
| Zoom | 1:1, can |
| Input Channel | 2 pcs (Analog and Adapter, or Same when up to 2 pcs BLE Device) |
| Input Range | 0 to ± 10 V dc, or 0 to ± 1000 V dc(Operating optional Adapter), 1 pcs Reading / s |
| Than Number | division Type: mx + b(Increment and Shift) User can Configuration |
| Display Unit | User can Configuration (7 digits , e.g. such as°C, psi or m / s) |
| Input Channel | 2 |
| Supported | Fluke Connect® 3000 Series |
| Acquisition | 1 pcs Reading / s |
| Operating Temperature | -25°C to +50°C(-13°F to 122°F)1 |
| Storage Temperature | No Battery: -25°C - +60°C (-13°F - 140°F), with Battery: -20°C - +50°C (−4°F - 122°F) |
| Operating Humidity | IEC 60721-3-3:3K6: |
| Operating Altitude | 2000 m(Height up to 4000 m when under is 1000 V CAT II / 600 V CAT III / 300 V CAT IV) |
| Storage Altitude | 12,000 m |
| Housing | IEC 60529:IP50 |
| Measure | IEC 60721-3-3 / 3M2 |
| EMC Compatibility (EMC) | EN 61326-1: CISPR 11: Group 1, Class A |
| Warranty Period | two years (not Package Battery) |
| Dimensions | 23.0 cm x 18.0 cm x 5.4 cm (9.1 in x 7.1 in x 2.1 in) |
| Weight | Instrument: 1 kg (2.2 lb) |
| Protection | can Connection Safety Cable (most Φ 6mm) |
| Measuring Range | 1 to 150 A AC Electric / 10 to 1500 A AC Electric |
| Probe Cable Length | 610 mm (24 in) |
| Probe Cable Diameter | 7.5 mm (0.3 in) |
| Weight | 170 g (0.38 lb) |
| Minimum Radius | 38 mm (1.5 in) |
| No Current | 100 kA (50 / 60 Hz) |
| / Operating Temperature Range Temperature Coefficient | of reading 0.05% / °C(of reading 0.028% / °F) |
| Operating Voltage | 1000 V CAT III, 600 V CAT IV |
| Output Cable Length | 2.0 m (6.5 ft) |
| Probe Cable Material | TPR |
| Weight | 115 g |
| Probe Cable Material | TPR |
| Connection Device Material | POM + ABS / PC |
| Output Cable | TPR / PVC |
| Operating Temperature | Test Environment under Test Lead Temperature is -20°C to +70°C(-4°F to 158°F), not Over Over 80°C (176°F) |
| Operating Lower Temperature | -40°C to +80°C(-40°F to 176°F) |
| Operating Lower Relative Humidity | 15% to 85% non-condensing |
| IP Rating | IEC 60529:IP65 |
| Warranty Period | a years |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Fluke 1742, The 1746 and 1748 online mobile electrical quality recorder allows you to easily and quickly access data needed to make critical power quality and energy decisions in real time._ Fluke 1740 online mobile power quality recorder series, small size, strong durability, dedicated to the need for flexibility in trouble resolution, Quantified energy utilization and analysis of electrical distribution systems, specially designed by technicians and engineers. The Fluke 1740 online mobile power quality recorder series fully meets international electrical quality standards (e.g. IEC 61000-4-30) and can also record up to 500 parameters simultaneously. The ability to capture events also helps you to identify electrical quality problems that are intermittent or difficult to detect more easily than ever before.S. The accompanying lornalyzeI software can be rapidly evaluated on the basis of national and international standards (e.g. EN 50160 and IEEE 519). The power quality of a transformer station or load place. With an optimal user interface, flexible current probes and smart measurement validation, you can use digital validation and correct connection errors to make them easier to set and reduce measurement uncertainties than ever before._ Use Wireless Connection (WiFi) to view data directly at the site, minimize your stay in potentially dangerous environments and reduce the difficulty of wearing PPE. Fluke 1748 records multiple parameters for each average time period. This allows you to analyse the power quality in detail and to link events to detailed wave-shaped data._ The basic power quality records, Fluke 1746 capture all relevant energy parameters, conduct energy efficiency studies and grid planning, and provide a good opportunity to develop a new energy-efficient system for the generation of electricity. And provides an option to upgrade to 1748. For simple load and energy studies, Fluke 1742 provides excellent performance with a solid and durable packaging, And can be upgraded to 1746 or to a full 1748. Which electrical quality recorder is for you? Functional Fluke 1742 Fluke 1746 Fluke 1748 functional voltage, current, power, power factor X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- Frequency • • Current/Reverse Energy • High-rise power demand • THD • Flash • Voltage and current-flow harmonics (up to 50)Stamps of power demandStamps of power demand • THD • Flash • Voltage and current-flow couplings of power demand •s of power demand • • X-X-Steps 1 • Uneven 1 • Rapid voltage change event 1 • Intermittent Wave (maximum 50) 1 Intermittent (maximum 50 ) • Decline, Up, up, up. • Inflow of electrical currents 1 • transient (low frequency)/wave-form deviations 2 • Recording trends • • wavelengths • Influenza — Downloaded from 2 • RMS Curb Map 2 • Communications Ethernet • USB(ini B) • • Pock • Conducting the ricko download (required to register) via a ricko router optional optional attachments flexible electrical current probes are not / B-based. Yes/B Version U Disk • USB Line • 3 PHVL-1730 Test Line • Test Line • Test • 3 PHVL • Test Line • Test 3 and Zero WiresScreech • Test • Test • • • Check Ques & Quess & Ques Test-guiding groups, Red/Black, 0.18 m • Test the guide group, red/Black,S-B 1.5 m • Crocodile Tile 4 4 4 173/174 Soft Pack • Cable Marker • Crocodile Tile Trails • Cables • The Cables • MP1-3R/1B-magnetic probe, — • MP1-3R/1B-magnetic probe — 1 group (3 red, 1 Black) Optional 1 1 174-Stocking Component Optional 1 1742-Fluke-XV XXV XV XV X XX 7/UPGRADE with 2 1742-8/UPGRADE or 1746-8/UPGRADE selection attached. Reference: 500, 1, 6
Recording and analysing electrical mass parameters such as voltage, harmonics, flashes, etc. for diagnostic and energy-saving assessment of the power distribution system.!
Q: FLUKE Fluke 1742/1746/1748 electrical quality, what can we do? Q: What can we do? Q Q Energy QQ Q What can do? What can do?
Specifications: Fluke IEC 61000-4-30 FLUKE 1742 1746 1748 20 3. Please contact our engineers for the full technical wording.
Q: What are the key technical indicators for 1742/1746/1748? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q
A: This page parameter table has been compiled by official information and contains a total of 142 items,.Spww.Sp. 3 per cent covering the flow process of the technical indicator/precision/< 1 V: 0.05V/<: 0.15 per cent of the process. 0.15 per cent of the process.StightSSSS For more detailed accuracy and environmental conditions, please refer to the official manual and this page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the type of electrical mass of FLUKE Fluke 1742/1746/1748? What are the scenarios?
A: This product is electrical (FLUKE Fluke/ electrical) quality. Recording and analysing electrical quality parameters such as voltage, harmonics, flash changes, etc., for diagnostics of the distribution system and energy conservation assessment
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.