Home › Products

Product Overview

FLUKE NORMA 4000 (Model NORMA 4000) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE NORMA 4000 — FLUKE · Yunke Electronics. Request a quotation and datasheet.

Brand: FLUKE | Category: FLUKE

Sales Inquiries: 15626018696 · 78403603@qq.com

FLUKE NORMA 4000

Technical Specifications

Phase Number1 to 3
WeightApprox. 5 kg (11 lb)
Dimensions150 x 237 x 315 mm
Display, 5.7 in / 144 mm - 320 x 240 pixels
BandwidthDC to 3 MHz or DC to 10 MHz, Depends on Input
Basic Accuracy0.2%, 0.1% or 0.03%, Depends on Input
Sampling Rate0.33 MHz or 1 MHz, Depends on Input
Voltage Input Range0.3 V to 1000 V
Current Input Range ( Connection Input, Not Operating Division Flow Device)0.03 mA or 20 A, Depends on Input
Configuration Memory Device4 MB
Setting Memory Device0.5 MB
(FFT)Height to 40 times Harmonic
RS-232 / USB InterfaceStandard
PI1 Processing Interface (8 Pcs Analog / Input and 4 Pcs Mode Output)optional
IEEE 488.2 / GPIB Interface (1 MBit / S Ethernet / 10 MBit / S or 100 MBit / S)optional
Fluke NormaView PC Software ( Data Lower , Division and )Standard
(FFT)Meter Calculation Harmonic and by Diagram . up to Same when Display 3 pcs Harmonic .
Number Digit Indication Device (DSO)Same when Display Multi up to 3 pcs Measured values (Sampling Value). Wave and .
Division Functions ( Quantity)Same when Display Multi up to 6 pcs can Configuration Number digits Value. Open / Conditions and Correction / toward .
Quantity Displaycan Display HO1 Multi up to 6 Circuit Signal Quantity Diagram. can Method Test Instrument Correction Accuracy Connection, and per Circuit Signal Phase digits Angle.
Recording DeviceDisplay a Setting Time Range internal Average, Analysis.
RAM Data StorageStorage Sampling Value and Average; Open / Conditions Setting.
Configurationwill Analysis Instrument Setting is by requires division Type Measurement and Display Data.
Operating Temperature Range5°C to 35°C(41°F to 95°F)
Storage Temperature Range-20°C to 50°C(-4°F to 122°F)
Housing MaterialFluke Norma Power Analysis Instrument Structure Non- Normal , and Use Housing, Full EMC .
Air ClassKYG DIN 40040, Maximum 85% Relative Humidity, non-condensing.
Power Supply85 V AC to 264 V AC, 50 Hz to 60 Hz, DC 100 to 260 V, Approx. 40 VA with Open Type Head. can Provided Phase Same Model Current Connection Wire .
Measuring InputSafety Hole, 4 mm, per Circuit Input 2 pcs. External Division Flow Device via BNC Base Connection.
OperationThin Film Key, with Light , Functions Key and Indicator make Functions.
Connectionthree Phase Analysis Instrument Rear Surface Plate
RangeDC and 0.2 Hz to Sampling Rate
Accuracy±0.01% Measured values (Reading)
OptionalIEEE 488.2 / 1 MBps
Electric Air SafetyEN 61010-1 / No. 2 Version 1000 V CAT II(600V CAT III)
Maximum Inputto Voltage Input Measuring Range is 1000 Veff, 2 kVpeak
Test VoltageNet Input Housing (Protection Guide Body): 1.5 KV AC
Test Voltage Electric ConnectionMeasurement Input: 5.4 kV AC
Test Voltage Measuring InputHousing: 3.3 kV AC
Test Voltage Measuring InputInput: 5.4 kV
ElectromagneticRadiation Standard IEC 61326-1, EN 50081-1, EN 55011 B Class
ElectromagneticIEC 61326-1 / A( Part Division), EN 50082-1
PP42Accuracy 0.2% (0.1% rd + 0.1% rg)
PP42 Current Range20 A
PP42 Sampling Rate341 kHz
PP42 Bandwidth3 MHz
PP50Accuracy 0.1% (0.05% rd + 0.05% rg)
PP50 Current Range10 A
PP50 Sampling Rate1 MHz
PP50 Bandwidth10 MHz
PP54Accuracy 0.1% (0.05% rd + 0.05% rg)
PP54 Current Range10 A
PP54 Sampling Rate341 kHz
PP54 Bandwidth3 MHz
PP64Accuracy 0.03% (0.02% rg + 0.01% rg)
PP64 Current Range10 A
PP64 Sampling Rate341 kHz
PP64 Bandwidth3 MHz
Continuous Load (Imin) / Range (Imax)0.3 A
Rated Current (Calibration Point)32 A
Calibration Point Basic Accuracy [%]± 0.03
Rated Current Basic Accuracy [%]± 0.03
Rated Voltage [V]320 mV
Nominal Resistance [Ohm]10 mΩ
When Range / (5s Load 15s Interval)100A / 1s-5s
BandwidthDC - 1 MHz
Angle Accuracy [° / kHz]± 0.1
Temperature Coefficient [Ppm / K]≤10
Weight (Kg / Lbs)0.62 / 1.36

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

FlukeNorma Power meters, Power Analyst: Reliable High Accuracy Measurement Tool in the field of electrical electronic testing and development A compact structure of Fluke Nour series power detection analyser/power meter Quests/powerometersStightly /Strate New measurement techniques have been introduced to help with motors, Engineers who develop and test inverters, lighting, power sources, transformers and auto parts to make their products more productive. Fluke Nour series power detection analysers/power meters are using high bandwidth structures. Capable of measuring single or triphase currents and voltage, harmonic analysis, rapid Fourier transformation (FFT) analysis, as well as calculating power and other calculations.?.Screech The power detector/power set includes Fluke Nour 4000 and Fluke Nour 5000 hexa-phase power detection analyser/power Rate. These robust, high-precision power detection analysers/power meters have good value for money, which are easy and reliable, whether they are used on site or as desktop instruments on laboratories or on test platforms. Application: Electro-Mada and Invert-Driving System Power Test Analysis - Power meters can accurately measure switch losses caused by inverters through detailed spectrum analysis and dynamic torque calculations and can comprehensively assess the torque transient harmony waves at high frequency._._.__._ The reverse-disruptive-drive system power detection analysis - Power meters can measure all electrical and mechanical power parameters in the same event window simultaneously, enabling users to observe the impact of one component on another or its impact on the system as a whole._ The power detection analysis of the lighting system - the bandwidth of the power gauge up to 10 MHz and the high sampling rate up to 1 MHz allow for detailed analysis of the flow-through signal. The power test is performed at very high frequencies. At the same time, the function of measuring input and output power provides the ability to calculate the loss of the flower. power gauges for the detection of transformer power, which measure the 6 phase power.__._. Even at very small power factors, the efficiency and loss of high-precision power transformers can be calculated and the electrical resistance of multi-phase transformer coils can be measured simultaneously. Automobile power detection analysis - power meter synchronizing electrical input and mechanical output provides data on the efficiency and wear and tear of the individual parts and the overall drive system.!

Key Advantages

  1. Product Overview
  2. Product specifications
  3. Handbook + Resources

Category Description

Recording and analysing electrical mass parameters such as voltage, harmonics, flashes, etc. for diagnostic and energy-saving assessment of the power distribution system.!

Applied industry & test project

FAQ

Q: FLUKE Fluke NORMA 4000 power quality, what can we do?

A: FLUKE Fluke NORMA 4000 electrical quality is an electrical quality product of FLUKE Fluke. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. The main functions listed officially include: product overview; product specifications; and manuals + resources.As a work-by-work selection type, the measurement target and process requirements can be provided, with cloud help

Q: What are the key technical indicators for NORMA 4000? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q

A: This page parameter table has been compiled by official information and contains a total of 80 items,.A.Signatures The general technical specifications/5.9 x 9.3 x 12.4 in/ optional backlight and contrast/basic functionality. For more detailed accuracy and environmental conditions, please refer to the official manual. This page is not open article by article.!

Q: How can the selection and the cargo date be confirmed?!

A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff

Q: What is the electrical mass of FLUKE Fluke NORMA 4000? What are the scenarios?

A: This product is electrical (FLUKE Fluke/ electrical) quality. Recording and analysing electrical quality parameters such as voltage, harmonics, flash changes, etc., for diagnostics of the distribution system and energy conservation assessment

Q: How can technical support be obtained after purchase?!

A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

FLUKE VR1710
FLUKE

FLUKE VR1710

VR1710
└ Power Quality
FLUKE NORMA 5000
FLUKE

FLUKE NORMA 5000

NORMA 5000
└ Power Quality
FLUKE 1760TR Basic
FLUKE

FLUKE 1760TR Basic

1760TR Basic
└ Power Quality
FLUKE 1760TR
FLUKE

FLUKE 1760TR

1760TR
└ Power Quality
FLUKE 1760
FLUKE

FLUKE 1760

1760
└ Power Quality
FLUKE 1742/1746/1748
FLUKE

FLUKE 1742/1746/1748

1742/1746/1748
└ Power Quality