FLUKE 1760TR Basic (Model 1760TR Basic) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 1760TR Basic — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Statistics Evaluation | Power Quality Statistics Compliant with EN50160 Standard and DISDIP Gauge, such as ITIC, CEBEMA and ANSI |
|---|---|
| Part Series Gauge | Detection Voltage , and in , and Memory at pcs Series Gauge in. Same when, Start-up Trigger Device a pcs pcs, and plus to this Series Gauge. |
| Not Recording | Fluke 1760 Recording or less Parameter RMS Value and Phase Minimum and Maximum: / • Voltage / • Current / • Electric Energy P, Q, S / • Power Number / • kWh / • / • not Balance / • Frequency / • Harmonic and Wave / Continuous Use or less Time Area: / Day / 10 minutes / Free Interval, e.g. such as: 15 minutes, 2 hours |
| Trigger Recording | RMS can at 10 ms(1 / 2 Period), 20 ms(1 pcs Period), 200 ms(10 / 12 pcs Period) or 3 sec(150 / 180 pcs Period) Adjustment Area Time. |
| Trigger Recording Indication Device: | with 8 pcs Channel Sampling Rate is 10.24 kHz |
| Trigger Recording Power Supply Signal | Phase digits and N Test Lead, Voltage and Current |
| Unit Mode | can New Rate. this Functions Allowable User Verification Instrument Gauge Setting, and Indication Wave Device, and pcs. |
| with Not Accuracy Degree | Reference Conditions, Provided two years |
| Mass Body Series | According to ISO 9001: 2000 Open , Control |
| Environment Conditions | Operating Temperature Range 0°C to +50°C; 32°F to +122°F |
| Environment Conditions Operating Temperature Range | -20°C to +50°C; -4°F to +122°F |
| Environment Conditions Memory Temperature Range | 20°C to +60°C; -4°F to 140°F |
| Environment Conditions Reference Temperature | 23 °C ± 2 K;74 °F ± 2 K |
| Environment Conditions Air Class | B2 (IEC 654-1), -20°C to +50°C; -4°F to +122°F |
| Maximum Operating Altitude | 2000 m: Maximum 600 V CAT IV¹, Power Supply: 300 V CAT III 5000 m: Maximum 600 V CAT III¹, Power Supply: 300 V CAT II |
| Reference Conditions | Environment Temperature 23°C ± 2 K; 74°F ± 2 K |
| Reference Conditions Power Supply | 230 V ± 10% |
| Reference Conditions Power Supply Frequency | 50 Hz / 60 Hz |
| Reference Conditions Signal | Nominal Input Voltage Udin |
| Reference Conditions Average | 10 minutes Interval |
| Housing | Insulation, Housing |
| EMC Compatibility (EMC) | Radiation Standard A Class, Compliant with IEC / EN 61326-1 Standard |
| EMC Compatibility (EMC) | IEC / EN 61326-1 |
| Power Supply | Range AC: 83 V to 264 V, 45 to 65 Hz |
| Safety Class | IEC / EN 61010-1 No. 2 Version |
| Power Consumption | NiMH, 7.2 V, 2.7 hours |
| Battery Set | such as Power Supply Output , built-in Battery can Continuous Power Supply Multi up to 40 minutes. Rear, or at Battery under, Fluke 1760 ; Power Supply Voltage Rear, can by Operating Front most New Setting Continuous Measurement. User can by Replacement Battery. |
| Display | Fluke 1760 with with Indication or less each LED Indication Lamp: 8 pcs Channel, Phase , Power Supply (Power Supply or Battery), internal Operating, Time Same and Data Transfer. |
| Display Power Supply Indication Lamp | Length : Power Supply Normal Power Supply. / : at Power Supply Output when via internal Part Battery Power Supply. |
| Display Channel Indication Lamp | per pcs Channel three Indication Lamp Use at Display / Overload / |
| Data Storage Device | 2 GB Depends on Model |
| Internal Mode | Linearity |
| Interface | by (100MB / s), compatible Windows® 98 / ME / NT / 2000 / XP RS 232, External Adjustment Control Adjustment Device (via RS 232) |
| RS 232 Baud Rate | 9600 Wave to 115K Wave |
| Dimensions (Height X Width X Depth) | 325 x 300 x 65 mm (2.8 x 11.8 x 2.6 in) |
| Weight | Approx. Approx. 4.9 ; 10.8 (excluding Accessories) |
| Warranty Period | 2 years |
| Calibration Time Interval | to at A Class 1 years, Other 2 years |
| 50 Hz Welding Systems Range | 50 Hz ±15%(42.5 Hz to 57.5 Hz) |
| 60 Hz Welding Systems Range | 60 Hz ±15%(51 Hz to 69 Hz) |
| Resolution | 16ppm |
| 50 Hz Power Supply Frequency Sampling Frequency | 10.24 kHz, Sampling Rate and Power Supply Frequency Same . |
| Frequency Measuring Not Accuracy Degree | < 20 ppm |
| Internal Part When Not Accuracy Degree | < 1s / |
| Measuring Time Interval | According to IEC 61000-4-30 Class-A Interval Value Meter |
| Measuring Time Interval Minimum, Maximum Value | 1 / 2 Period, e.g. such as: 10 ms RMS Value (50 Hz) |
| Measuring Time Interval | per pcs Channel Sampling Rate Range is 100 kHz to 10 MHz |
| Specification | Compliant with IEC 61000-4-7:2002 Standard: 200 ms |
| Specification | Compliant with EN 61000-4-15:2003 Standard: 10 minutes (Pst), 2 hours (Plt) |
| Input Quantity | Use at Voltage and Current Measurement 8 pcs Current Input. |
| Sensor Safety | Maximum 600 V CAT IV(Depends on Sensor) |
| Basic Safety Class | 300 V CAT III |
| Rated Voltage (Rms) | 100 mV |
| Range (Peak) | 280 mV |
| Overload Capacity (Rms) | 1000 V(Continuous) |
| Voltage Upper Rate | Maximum 15 kV / µs |
| Input Resistance | 1 MΩ |
| Input Capacitance | 5 pF |
| Input Filtering Device | per pcs Channel all with with a pcs No Source Low General Filtering Device, Filtering Device and a pcs 16 digits A / D Rotation Replace Device. and General-purpose Control when Same to with Channel Sampling. / Filtering Device can Protection Voltage , and Limit Signal above Rate, Low Height Division Quantity, Yes Noise Voltage Over Over A / D Rotation Replace Device Sampling Rate a Half 80 Division , from and at Extreme Large Width Range internal Non- Normal Small Measurement Error. at Extreme Terminal Operation Conditions under (such as Rotation Replace Device Output Terminal Voltage) also Yes Effective. |
| Reference Conditions Lower Not Accuracy Degree | including Voltage Sensor not Accuracy Setting degrees Compliant with IEC 61000-4-30 Class-A. with Voltage Sensor all Applicable at Height up to 5 kHz DC |
| Reference Conditions Lower Not Accuracy Degree Sensor 1000 V | 0.1% Udin = 480 V and 600 V P-N |
| Reference Conditions Lower Not Accuracy Degree Sensor 600 V | 0.1% Udin = 230 V P-N |
| with Not Accuracy Degree | I Class, Compliant with EN 61000-4-7:2002 Standard |
| Reference Conditions | 23°C ± 2 K < 60 % rH;74°F ± 2 K < 60 % rH |
| Temperature | 100 ppm / K |
| Specification | < 0.05% / years |
| Total Than | > 100 dB(50 Hz when) |
| Temperature | by at Temperature Increment Width : < 0.005% / K |
| Specification | by at Increment Width : < 0.04% / years |
| Noise | Noise Voltage, Circuit Input: < 40 µV |
| DC | ±(0.2% rdg + 0.1% Sensor) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: IEC 61000-4-30 EN50160 Fluke 6000 V 10 MHz 600V 1000 A 200 A 1760 50 4 2 TR GPS UPS THD GB. Please contact our engineers for the full technical wording. Reference values: 1760, 4.
Recording and analysing electrical mass parameters such as voltage, harmonics, flashes, etc. for diagnostic and energy-saving assessment of the power distribution system.!
Q: FLUKE Fluke 1760 TRK power quality, what can we do?
A: FLUKE Fluke 1760 TRK is an electrical quality product of FLUKE Fluke. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. The main functions listed officially include: Full compliance with level A requirements: implementation of tests in accordance with strict international standards for IEC 61000-4-30 A;Standards for the use of the technology;Standards for the use of the technology;Standards for the use of the technology; ands for the use of the technology;s for the use of the technology;s for the use of the technology; ands for the use of the technology;s for the use of the technology and the use of the technology and GPS Time Synchronization: Accurately linking data to events or data sets generated by other tools;_ Flexible and fully configured thresholds and tic factors: Users can define detailed interference detection and record standards to identify specific problems.Text and volume requirements can be provided, with cloud help.ScreenScreaksScres
Q: What are the key technical indicators for 17601ZQ30? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q:. Reference: TR. Reference values: 1760.
A: This page parameter table is organized as official information and contains a total of 78 items covering survey function overview/general data/signal reconciliation/measurement input. For more detailed accuracy and environmental conditions, please refer to the official manual. This page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the type of electrical mass of FLUKE Fluke 1760 TR30? What are the scenarios?
A: This product is electrical (FLUKE Fluke/ electrical) quality. Recording and analysing electrical quality parameters such as voltage, harmonics, flash changes, etc., for diagnostics of the distribution system and energy conservation assessment
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
Reference values from the original datasheet: 1760, 1760, 1760, 1760, 1760, 1760.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.