CEDAR NTS7-RT2 Torque Testers (Model NTS7-RT2) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR NTS7-RT2 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: CEDAR | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measurement Range | 0.020~2.000 N·m |
|---|---|
| Measurement Unit | N·m / cN·m |
| Rated Input Voltage | 24V DC |
| Accuracy | ±1.0%(499 digit or less ±5 digit) |
| Sampling Period | 1000 Data /1 s |
| Rotational Speed | 5~50 rpm(per 5 rpm Adjustable) |
| Rotatable Direction | CW Direction (Right Thread Direction), CCW Direction (Right Thread Open Direction) |
| Control Angle | Approx. 0.968° |
| Rotatable Angle | 1°~9999° can Setting |
| Communication Port | USB、RS232C |
| External Port | Input 1 ch, Output 3 ch |
| with Part | Check , Calibration Certificate, can Property Body Series Diagram (※All at 1 ) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
NTS7 series is CEDARSpunnersThe electro-scree test machinepower driven, with a speed of rotation chosen in 5 50 rpm, which is capable of either stung the screws by a certain torque or of torque determination and wave-forming. The colour liquid crystal is clearly visible. : power driven by a single torque. torque 50 rpm A combination of USB and RS232C is available and a rich external control command is prepared; the speed of rotation, control angle and rotation angle can be set and tested and adapted to the screw-stress conditions. Reference: 5 rpm
Tests and re-records for screw-stress conditions (tangle, speed, angle) and record analysis of torque curves.?.Screams of the torque curves
Color liquid crystal display, easy to observe
There are a lot of external control orders
The speed of the rotation can be selected between 5 50 rpm (in 5 rpm)
But you're gonna have to twist it.!
Connect AC power, auto switch/off
Has 2 communications port (USB, RS232C)SpwxSpwKXQQQ
The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARNTS7-RT2) the series is NTS7-RT05/NTS7-RT2, and the difference item for other models in the series is shown separately in that model entry
NTS7-RT05For 2.0 — 500.0 mN mm (measurement unit mN m/cN m)NTS7-RT2For 0.020-2.000 N·m (N.m/cN.m.) with the same rated input voltage 24V DC, The accuracy of the sampling cycle 1000 data/sec and 1.0%. The machine is CW in the direction (right screw, right).ScreechSp.Sp.St.St.St.St.St.St.St.St.St.St.St.St.St.St.St.S The direction of CCW (right cog unplug) is set in both directions
Speed of 5 ~ 50 rpm (sensitized per 5 rpm) control angle of about 0.968°, rotated angle X X —1°~9999°Sets the range -- this means that the tightness process can be controlled in addition to the torque, and is suitable for verification of the condition of the hardened process. the external port is the input 1ch, the output 3 ch,, 1XQch, Other equipment can be connected.!
Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR NTS7-RT2The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp
Q: What does NTS7 do?
A: An electro-dynamic screw-stretch tester: The screw can be stung at a set speed with a torque and recorded torque/angle data for validation and process confirmation of the firm conditions
Q: How do two models distinguish?!?
A: NTS7-RT05 for 2.0 500.0 mN mm, NTS7-RT2 for 0.020 2.000 N·m, selected at the torque level of the measured screw
Q: Can you set the speed and angle?
A: The speed of rotation may be set in 5 rpm between 5 ~ 50 rpm; the rotation angle may be set within 1 ~ 9999 , , , XX ontrol angle approximately 0.968°
Q: How do you connect to computers or production lines?!?
A: has two communication ports, USB and RS232C, with external ports for entry 1ch, output 3ch and a rich external control command; The combined AC power source is automatically open/off
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.