CEDAR CP-10 Torque Testers (Model CP-10) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR CP-10 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: CEDAR | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Torque | 1 N·m |
|---|---|
| Accuracy | 1% |
| Part Shape | □9.5 |
| to Unit Type (Official) | WDI Series, CD-100M, CD-10M, DI-9M Series, NDI Series |
| Operating Notes (Official) | points Check Standard Rod not Horizontal when, Torque Value |
| Application | Torque Testers(Torque Meter) Day Normal points Check and Accuracy |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
CP series is CEDAR forThe torque test is dailyA fixed torque of a rated size is generated by placing the torque tester up and inserting the torque bar into its nesting port. The normal or non-normal instrument readings are readily confirmed by CP-1 (0.1 N·m) or CP-10 (1 N·m) and are simple standard for daily field confirmation. The corresponding aircraft species include the WDI series, CD-100M, CD-10M, DI-9M series and NDI series
Daily point and simple confirmation for the torque test (Truckometer) to determine whether the instrument needs to be sent for calibration
Reciprocal species: WDI, CD-100M, CD-10M, DI-9M, NDI
A stand-up tester and insert a point check standard pole will produce a fixed torque, which will be simple
Official note: When the standard pole is not horizontal, the torque values change
The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARCP-10) the series is CP-1/CP-10, and the difference item for other models in the series is shown separately in that model entry
The official way of doing this is to put the torque testerStand Up Placeinsert the point check standard pole into its nesting port, and then produce a rated fixed torque (CP-1 for 0.1 N·m, CP-10 for 1 N·m) Read the instrument display values to determine whether the signal values are normal
Official special reminder: When the standard pole is not horizontal, the torque value generated changesThe standard pole is therefore confirmed to be in horizontal condition by the official cue, otherwise the result is unreliable
Officially gives the accuracy 1% and the embedded shape □ 9.5. This series is for routine spot checks and is used to quickly confirm the instrument status; when a calibration certificate is required, The measurement cycle should be sent to qualified institutions for validation.!
Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR CP-10The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp
Q: What's the difference between CP-1 and CP-10? Q: Q: Q
A: Different tortoises occur: CP-1 for 0.1 N·m, CP-10 for 1 N·m; all are 1% accuracy and all embedded shapes □ 9.5. Select the appropriate standard pole according to the measure of the tow measure
Q: What toxes can be used?
A: Officially listed aircraft are the WDI series, CD-100M, CD-10M, DI-9M series, NDI series
Q: What should be the watch when using it?!?
Please contact our engineers for the full technical wording of this item.
Q: Can the point-checking standard poles replace the calibration certificate?
A: No. It is used for routine pointing (acknowledged that instrument displays are abnormal) and is still sent for measurement cycles when formal calibration certificates are required..ScreaksScreechsScreaksss
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.