FLUKE LinkIQ-100 IE (Model LinkIQ-100 IE) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE LinkIQ-100 IE — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Functions | Description |
|---|---|
| User Interface (UI) Supported Language | (SW v1.0) |
| Weight | 1 lbs 6 oz (624g) |
| Battery | Type: Battery, 3.6 V, 6400 mAh / Battery Life Time: 8 hours (Standard) / Charging Time: 4.5 hours / Charging Temperature Range: 0°C to +40°C |
| AC Adapter | Input: 100 - 240 VAC ±10%, 50 / 60Hz / Output: 15 VDC, Maximum 2 A / II Class |
| Main Unit Interface | USB C Type |
| Display | 800 x 480 Capacitance Type Multi points Display |
| Dimensions | 8.5 in x 4.5 in |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -10°C to +60°C |
| Operating Relative Humidity | 0 % - 90 % (0°C - 35°C) / 0 % - 70 % (35°C - 45°C) |
| Operating Altitude | 4000 m( / Operating AC AC Adapter when is 3200 m) |
| Vibration | Supplied, 2 g, 5 Hz-500 Hz |
| Specification | 1 m , 6 Surface |
| Functions | Description |
| Protocol | Circuit Layer Protocol (LLDP) / Cisco Protocol (CDP) / Circuit (FLP) |
| Most Device / (Via Protocol Can Operating Lower) | Replace Unit Name / Port No. / VLAN Name / Nominal Data Rate / Nominal Dual |
| Power Supply Compatible | IEEE 802.3af / at / bt / and Features Resistance Hardness pcs / and LLDP / CDP Software |
| Power Supply | Nominal Power Class (0 to 8) / Nominal Available Power / Electric Wire to / Single Features and Dual Features |
| Power Supply Measuring | Load Voltage (V) / Load Power (W) |
| Port Indication Lamp | Phase Connection Port Indication Lamp |
| Functions | Description |
| Test Port | Display Type 8 Needle Hole, can Connection 8 Needle (RJ45) Head. |
| Automatic Test Adjustment Test | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, only Limit Wire Diagram. / Test Speed: 6 s, Applicable at Length |
| Cable Type | Balance Dual Wire Wire / Non- Display Dual Wire / Display Dual Wire / 2 to and / or 4 to |
| Only Limit Wire Test | Recording Wire Diagram / per pcs Wire to Length / Division Wire to / User optional T568A or T568B / User optional Setting (Direct Connection, Half , Full ) / Test Speed: 1 s, Applicable at Length |
| Length (Maximum) | 305 m (1000 ft) |
| Nominal Speed (NVP) | User can Setting |
| Device | and Fluke Networks IntelliTone Probe compatible Number digits . / and General-purpose Analog probe compatible Analog . |
| Remote ID Positioning Device | Operating Remote ID Terminal Multi up to 7 pcs a Port or Chamber Base |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: MS-IE EtherNet/IP Mb/s Gb/s RJ45-RJ45 M-F RJ45/11 RJ45/M12X RJ45/M12D RJ45/M8D RJ45 M12X M12D M8D 305 m 90W 1000 10 8 1 PROFINET BASE GBASE VLAN ID. Please contact our engineers for the full technical wording. Reference values: 45, 10, 11.
For industrial network cable and link diagnostics to help with rapid positioning cabling and communication failures. —
Q: What can FLUKE Fluke LinkIQ-100 IE industrial Ethernet tester do?
A: FLUKE Fluke LinkIQ-100 IE Industrial Ethernet Tester is an Ethernet tester product of FLUKE Fluke. XQO. XVX. XE. XE. XE. XE. XE. XE. XE. XE. The main functions listed officially include: for Ethertz/IP, PROFINET, and for the purpose of the CAT, the following are the main features: Validation of cable performance up to 10 GBASE-T; acquisition of data speed for connected switches, exchange name, port number and VLAN; Tests the PEE level (1-8) and power and performs load tests. If you want to use a work condition selection, you can provide measurement objects and volume requirements, which are confirmed with cloud help
Q: What are the key technical indicators for LinkIQ-100 IE? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q
A: This page is based on official information and contains a total of 30 items covering the main product specification items. More detailed accuracy and environmental conditions are set out in the official manual, which is not article by article..The list of parameters for this page is based on the official manual. by Article by Article by Article.SSSSSS
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the product category of the FLUKE Fluke LinkIQ-100 IE industrial Ethernet test? What are the scenarios?
A: This product is an industrial Ethernet tester (FLUKE Fluke/ Industrial Ethernet tester). It is used for the diagnosis of industrial network cables and links to help locate fast-track cabling and communication failures
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
Reference values from the original datasheet: 10, 10, 45, 45.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.