FLUKE MicroScanner 2 IE (Model MicroScanner 2 IE) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE MicroScanner 2 IE — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Operating Temperature | 32 °F - 113 °F (0 °C - 45 °C) |
|---|---|
| Storage Temperature | -4 °F - +140 °F (-20 °C - +60 °C) |
| Operating Relative Humidity (% RH, Non-condensing) | 90 % (50 °F - 95 °F 10 °C - 35 °C) / 75 % (95 °F - 113 °F 35 °C - 45 °C) |
| and Vibration | Supplied, 2 g, 5 Hz-500 Hz(2 class) / 1 m Test, with with or without Connection Wire Diagram Adapter |
| Safety | IEC 61010-1 No. 3 Version |
| Altitude | 4000 m; Storage: 12,000 m |
| EMC | IEC 61326-1 |
| Test Connection Head | Display Type 8 Needle Hole, can Connection 8 Needle (RJ45) and 4 Needle (RJ11) Head. MicroScanner2: Use at Test Same Shaft Cable F Connection Head. |
| Power Supply | Battery Type: 2 cells AA(NEDA 15A, IEC LR6) Alkaline Battery / Battery Battery Life Time: 20 hours (Normal Operating) / Other compatible Battery Type: 2 cells AA Phase Unit Battery, NiMH Battery, Battery |
| Dimensions and Weight (Installed with Battery Connection Connection Wire Adapter) | 3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) / MicroScanner2:10.6 oz (300 g) |
| Display | Single Backlight LCD |
| Cable Test | Measurement Length, Verification Connection Wire Diagram, Remote ID Positioning Device and Detection by Port. at Single pcs Display Screen above Display . |
| Specification | IntelliTone™ and Normal Gauge Analog Signal |
| PoE | MicroScanner2: and Detection compatible 802.3af PoE(by Power Supply) Device |
| Test Cable Type | Dual Wire: UTP, FTP, SSTP / Same Shaft Cable (MicroScanner2): 75 Ω, 50 Ω, 93 Ω |
| Length Test | Measuring Range: 460 m (1500 ft) / Resolution: 0.3 m (1 ft) / Typical Accuracy: ± 4% or 0.6 m (2 ft), whichever is greater. NVP not Accuracy Setting Property at external Error. / Calibration: User can Setting Dual Wire and Same Shaft Cable NVP Value (MicroScanner2). can Use Length Cable Accuracy Setting Actual NVP Value. |
| Connection Wire Test | Detection Single pcs Test Lead , Circuit, Error Connection, Division Wire to, and up to pcs Terminal Adapter ID. per than e.g. Length Control Connection Wire Diagram, by Direct Place Display Large Position. |
| Port Detection | MicroScanner2: Detection 802.3 by Port Nominal Rate, Applicable at 10 Mbps, 100 Mbps and 1 Gbps Rate. |
| Device | supports Use Fluke Networks Number digits Type IntelliTone™ Probe Origin and Control Cable Connection Wire Diagram. can Origin Type and Standard Analog probe compatible . SmartTone™ Functions can at Operating IntelliTone or Analog probe when can Place Wire in Cable. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
FlukesniXSannerTMZX14 Industrial Ethernet cable tester for RJ45, M12X, , M12X, M12X XV XVX XVX XVX XVX XVX XV XV M12D and M8D end cables perform break tests and display results graphically so that you can see openings, short circuits and cross-lines. It also reports which end of the cable is problematic. The failure of the cable will result in costly production downtime, and it is therefore important to quickly locate the damage to the cable for replacement or maintenance. Cat6A jump, RJ45 header, RJ45 head jump, RJ45/M12X head jump, RJ45/M12D head jump, jump,Screll XVSeveSSSS RJ45/M8D jump (for testing M12X), M12D, M8D end cable. . Reference: 2
For industrial network cable and link diagnostics to help with rapid positioning cabling and communication failures. —
Q: What can FLUKE Fluke0ZXMicroSnanner 2 IE industrial Ethernet tester do? Q: What can the Ethernet tester do?
A: FLUKE FlukeNNner 2 IE Industrial Ethernet Tester is an Ethernet tester product of FLUKE Fluke. XEther Tester. tester. XEthernet Tester. X The main functions listed officially include: graphic cable maps, cable length, cable ID and failure point distance; testable RJ11, RJ45, coax cable and type of industrial Ethernet connector; The data is used to locate the cable using the IntelliToneTM digital and analogue audio technology.Stamps are provided with measurement objects and volume requirements, which are confirmed by cloud help.TonyTScrew.Screts
Q: What are the key technical indicators for MicroSnanner 2 IE? Q: What are the key technical indicators?SS
A: This list of parameters is compiled by official sources and contains a total of 19 items covering environmental parameters/general technical indicators/test models/performance indicators. For more detailed information on accuracy and environmental conditions, please refer to the official manual. This page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the category of the FLUKE Fluke0ZXMicroSnanner 2 IE industrial Ethernet tester? What are the scenarios?
A: This product is an industrial Ethernet tester (FLUKE Fluke/ Industrial Ethernet tester). It is used for the diagnosis of industrial network cables and links to help locate fast-track cabling and communication failures
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.