FLUKE LinkIQ-100 (Model LinkIQ-100) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE LinkIQ-100 — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Functions | Description |
|---|---|
| User Interface (UI) Supported Language | (SW v1.0) |
| Weight | 1 lbs 6 oz (624g) |
| Battery | Type: Battery, 3.6 V, 6400 mAh / Battery Life Time: 8 hours (Standard) / Charging Time: 4.5 hours / Charging Temperature Range: 0°C to +40°C |
| AC Adapter | Input: 100 - 240 VAC ±10%, 50 / 60Hz / Output: 15 VDC, Maximum 2 A / II Class |
| Main Unit Interface | USB C Type |
| Display | 800 x 480 Capacitance Type Multi points Display |
| Dimensions | 8.5 in x 4.5 in |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -10°C to +60°C |
| Operating Relative Humidity | 0 % - 90 % (0°C - 35°C) / 0 % - 70 % (35°C - 45°C) |
| Operating Altitude | 4000 m( / Operating AC AC Adapter when is 3200 m) |
| Vibration | Supplied, 2 g, 5 Hz-500 Hz |
| Specification | 1 m , 6 Surface |
| Functions | Description |
| Protocol | Circuit Layer Protocol (LLDP) / Cisco Protocol (CDP) / Circuit (FLP) |
| Most Device / (Via Protocol Can Operating Lower) | Replace Unit Name / Port No. / VLAN Name / Nominal Data Rate / Nominal Dual |
| Power Supply Compatible | IEEE 802.3af / at / bt (SW v1.0) / and Features Resistance Hardness pcs / and LLDP / CDP Software |
| Power Supply | Nominal Power Class (0 to 8) / Nominal Available Power / Electric Wire to / Single Features and Dual Features |
| Power Supply Measuring | Load Voltage (V) / Load Power (W) |
| Port Indication Lamp | Phase Connection Port Indication Lamp |
| Functions | Description |
| Test Port | Display Type 8 Needle Hole, can Connection 8 Needle (RJ45) Head. |
| Automatic Test Adjustment Test | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, only Limit Wire Diagram. / Test Speed: 6 s, Applicable at Length |
| Cable Type | Balance Dual Wire Wire / Non- Display Dual Wire / Display Dual Wire / 2 to and / or 4 to |
| Only Limit Wire Test | Recording Wire Diagram / per pcs Wire to Length / Division Wire to / User optional T568A or T568B / User optional Setting (Direct Connection, Half , Full ) / Test Speed: 1 s, Applicable at Length |
| Length (Maximum) | 305 m (1000 ft) |
| Nominal Speed (NVP) | User can Setting |
| Device | and Fluke Networks IntelliTone Probe compatible Number digits . / and General-purpose Analog probe compatible Analog . |
| Remote ID Positioning Device | Operating Remote ID Terminal Multi up to 7 pcs a Port or Chamber Base |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: RJ45-RJ45 RJ45/11 90W 10 8 1 BASE GBASE VLAN PC ID. Please contact our engineers for the full technical wording. Reference values: 10.
For industrial network cable and link diagnostics to help with rapid positioning cabling and communication failures. —
Q: What can the FLUKE FlukeLinkIQ-100 industrial Ethernet tester do? Q: What can I do? Q: What can I do?
A: FLUKE FlukeLinkIQ-100 Industrial Ethernet Tester is an industrial Ethernet tester product of FLUKE Fluke.sA: FLUKE1 .Tine Tester. XEnet Tester. The main functions listed officially include: verification of cable performance at a speed of up to 10 GBASE-T through frequency-based measurements; acquisition of data speed of the connected switch, the name of the switch,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Port and VLAN; detects PEE levels (1-8) and power and performs load tests. If you want to use a work schedule, you can provide measurement of objects and mass requirements. Confirmed with the assistance of Clouds Section.!
Q: What are the key technical indicators for LinkIQ-100?
A: This page is based on official information and contains a total of 30 items covering the main product specification items. More detailed accuracy and environmental conditions are set out in the official manual, which is not article by article..The list of parameters for this page is based on the official manual. by Article by Article by Article.SSSSSS
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the category of the FLUKE FlukeLinkIQ-100 industrial Ethernet tester? What are the scenarios?
A: This product is an industrial Ethernet tester (FLUKE Fluke/ Industrial Ethernet tester). It is used for the diagnosis of industrial network cables and links to help locate fast-track cabling and communication failures
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
Reference values from the original datasheet: 10.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.