FLUKE MicroScanner PoE IE Kit (Model MicroScanner PoE IE Kit) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE MicroScanner PoE IE Kit — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Operating Temperature | 32 °F - 113 °F (0 °C - 45 °C) |
|---|---|
| Storage Temperature | -4 °F - +140 °F (-20 °C - +60 °C) |
| Operating Relative Humidity (% RH, Non-condensing) | 90 % (50 °F - 95 °F 10 °C - 35 °C) / 75 % (95 °F - 113 °F 35 °C - 45 °C) |
| and Vibration | Supplied, 2 g, 5 Hz-500 Hz(2 class) / 1 m Test, with with or without Connection Wire Diagram Adapter |
| Safety | IEC 61010-1 No. 3 Version |
| Altitude | 4000 m; Storage: 12,000 m |
| EMC | IEC 61326-1 |
| Test Connection Head | Display Type 8 Needle Hole, can Connection 8 Needle (RJ45) and 4 Needle (RJ11) Head. |
| Power Supply | Battery Type: 2 cells AA(NEDA 15A, IEC LR6) Alkaline Battery / Battery Battery Life Time: 20 hours (Normal Operating) / Other compatible Battery Type: 2 cells AA Phase Unit Battery, NiMH Battery, Battery |
| Dimensions and Weight (Installed with Battery Connection Connection Wire Adapter) | 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) / MicroScanner™ PoE:10.6 oz (300 g) |
| Display | Single Backlight LCD |
| Cable Test | Measurement Length, Verification Connection Wire Diagram, Remote ID Positioning Device and Detection by Port. Cable Resistance Over Over 12.5 Ω when, MicroScanner™ PoE can Display HIGH Ω. at Single pcs Display Screen above Display . |
| Specification | IntelliTone™ and Normal Gauge Analog Signal |
| PoE | MicroScanner™ PoE: and Detection Yes No at compatible 802.3af, at, bt and UPOE (Cisco General-purpose by Power Supply) PoE Device |
| Test Cable Type | Dual Wire: UTP, FTP, SSTP |
| Length Test | Measuring Range: 460 m (1500 ft) / Resolution: 0.3 m (1 ft) / Typical Accuracy: ± 4% or 0.6 m (2 ft), whichever is greater. NVP not Accuracy Setting Property at external Error. / Calibration: User can Setting Dual Wire NVP Value. can Use Length Cable Accuracy Setting Actual NVP Value. |
| Connection Wire Test | Detection Single pcs Test Lead , Circuit, Error Connection, Division Wire to, and up to pcs Terminal Adapter ID. per than e.g. Length Control Connection Wire Diagram, by Direct Place Display Large Position. |
| Port Detection | MicroScanner™ PoE: Detection 802.3 by Port Nominal Rate, Applicable at 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps and 10 Gbps Rate. |
| Device | supports Use Fluke Networks Number digits Type IntelliTone™ Probe Origin and Control Cable Connection Wire Diagram. can Origin Type and Standard Analog probe compatible . SmartTone™ Functions can at Operating IntelliTone or Analog probe when can Place Wire in Cable. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
FlukesniXSannerTM PoE Industrial Ethernet cable tester for RJ45, M12X,S-SpunnersSpS-SpunnersSpSpS-SpS-SpS-SpSpS-SpS-S The M12D and M8D end cables perform break-through tests and display results graphically so that you can see circuits, short circuits and cross-lines. MS-POE also quickly determines whether the problem is caused by inadequate power supply or by the power supply. Cables and power failures can lead to costly production downtimes, and the power supply can be reduced to less than 100 percent of the total. It is therefore important to locate cable damage quickly for replacement or maintenance. Including IntelliTone Pro 200 probe, Remote ID suite,. Handbag, double connector adapter, Cat6A jump, RJ45 header RJ45 head jump, RJ45/M12X jump, RJ45/M12D jump, jump, RJ45/M12D jump,S RJ45/M8D jump (for testing M12X), M12D, M8D end cable
For industrial network cable and link diagnostics to help with rapid positioning cabling and communication failures. —
Q: What can FLUKE0 ZQ30 tester be used to test the Ethernet? Quest Quétance Quétre (Quest) Quétété Quété. Reference: Fluke, IE
A: FLUKE FlukeSnanner PoE IEBEN tester for FLUKE Fluke QEN ARTERERINE test XN XEXN XN XN The instrument product. — The main functions listed officially include the execution of cable testing for the industry Ethernet network (including Ethernet / IP, Profine, EtherCAT-based systems); — Displays cable length, connection chart and failure point distance; shows network switch speed up to 10G and PoE power. If you need a work-class selection, you can provide measurement object and volume requirements, which are confirmed with cloud help
Q: What are the key technical indicators for MicroSanner PoE IE30?!
A: This list of parameters is compiled by official sources and contains a total of 19 items covering environmental parameters/general technical indicators/test models/performance indicators. For more detailed information on accuracy and environmental conditions, please refer to the official manual. This page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the product category of the FLUKE Fluke0ZXMicroSanner PoE IE30 industrial ED tester? What are the scenarios?
A: This product is an industrial Ethernet tester (FLUKE Fluke/ Industrial Ethernet tester). It is used for the diagnosis of industrial network cables and links to help locate fast-track cabling and communication failures
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.