Home › Products

Product Overview

CEDAR DI-9M-8 Torque Testers (Model DI-9M-8) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR DI-9M-8 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR DI-9M-8 Torque Testers

Technical Specifications

Measurement Range0.020~8.000 N·m / 2.0~800.0 cN·m
Standard Accessories ( Model)Measurement Connection Head OW-20/OW-60 each 1 pcs
Accuracy±0.5%(Reading Value; 499 digit or less ±3 digit)
DisplayLCD 4 Digits digits Display
Measuring DirectionCW-CCW(Right · Left Direction)
Measurement ModeTrack/Peak(Peak Hold)/Peak-Down( Peak Hold)/C(Real-time Output)
Pass/fail judgementper Setting Range Judgment (P-P Mode when); GOOD Lamp points /NG Lamp
Maximum · Minimum · AverageDisplay Memory Data pcs Number, Maximum, Minimum, Average
Real-time OutputApprox. per 1 / 180 s Output a times Load Torque
Data Storage800 records
Data outputASCII division Type (Baud Rate 19200)
Auto Power-off10 minutes No Operation Rear Power Supply OFF
Power SupplyNiMH Battery
Charging Time / Operating TimeCharging 3 hours / Continuous Approx. 12 hours Operating
Base Interface□20 / □9.5
Dimensions / Weight160(W)×125(D)×55(H) mm / Approx. 1 kg
Standard Accessories (Total )Thread Method ( Method 20×20×20, 5 Surface Thread Hole, Processing), Dedicated Charger (Input AC100~230V 50 / 60Hz), Case, Check , Calibration Certificate, can Property Body Series Diagram

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

DI-9M-8/DI-9M-08 is CEDAR-DVSpunishmentSpIDSpunctionSpIDManual tools (twig screws, wrench)Digital torque tester. Compared to the CD series, the DI-9M series, the random hand-held tool for "cube-tube" of the tool, it can be directly checked by the hardwired torque of the tool. The display boards also support the visual display of the measurement patterns, the unit of measurement and the maximum minimum of the average of

Application Scope

The torque point check and cycle check, which apply to manual torque screws, wrench wrench, etc., are the basic torque management equipment

Key Features

Show "measuring mode" "measuring unit" "max.m. average"

Measuring units to switch

Data Storage 800 bar

Approximately once per 1/180 second in real time output%1%2%2%2Sec1 seconds%2Sec1

Data acquisition software can be downloaded free of charge

A handheld device to determine the "Standed Cube" (5 face cothole)StightScreenStightSt

Notes on Specification Terminology

The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARDI-9M-8) the series is DI-9M-8/DI-9M-08, and the difference item for other models in the series is shown separately in that model entry

The role of the screw cube

The DI-9M series randomly attached the cube curing tool 20×20, which is a tool for the management of the cubes. Five-faced coils with different specifications (M2.6/M3/M4/M5/M6 or M1/M1.2/M1.4/M2/M3) Quest XC X/ The torque value can be read in close proximity to actual tightness and solve problems with manual tools that are difficult to interset. Reference: 20 mm

Distribution of applicable two modelsAccording

DI-9M-8(b) The volume 0.020 — 8.000 N·m (2.0 — 800.0 cN.m.) is a conventional torque with a OW-20/OW-60 calibrated interface; XXQ X; X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-XDI-9M-08Volume 2.0 — 800.0 mN mm (0.20 — 80.00 cN m) for microtangles with OW-025/OW-10 interface. X-X-X-X-X-Q X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- The two-type homeform, power source and data function are consistent.!

Standard Accessories and Ordering

Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR DI-9M-8The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp

FAQ

Q: Is DI-9M-8 and DI-9M-08 the same machine? Q: Q: Q: Question
A: The body is the same, with different scales from the attached one, and is the same series of two torque stylized files. 8 is 0.020 — 8.000 N·m, 08 is 2.0 800.0 mN.m., the magnitude difference 10 is multiple times the actual torque of the measure tool

Q: Can you detect a hand-to-hand wrench?
A: Yes. Randomly attached cubes are designed for manual tool determination; the five-faced device has different thread holes, which allow the proper aperture to be selected according to the tool to be used

Q: Precision and display?
A: Official specification is 0.5% (read value, 3 §, below § ) ScreaksA: Screw Screts Sp. Displays the number of LCD 4 bits, the plugin interface □ 20/ □ 9.5. Reference: 499

Q: How many pieces of data can be stored?!?
A: Data storage 800 strips and support for real-time output approximately once per 1/180 seconds, which can be recorded and recorded on computers in conjunction with official free software

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)