Home › Products

Product Overview

CEDAR DWT-200 Torque Testers (Model DWT-200) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR DWT-200 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR DWT-200 Torque Testers

Technical Specifications

Measurement Range7.0~200.0 N·m
Accuracy±0.5%(499 digit or less ±3 digit)
Measuring DirectionCW(Right Direction)
Measurement ModeTrack, P-P(Peak Hold), P-D(Peak under Hold)
Auto Power-offPosition 5 minutes Automatic Electric
Power Supply · Operating Time5 Size Battery 4 cells, Continuous Operating Approx. 20 hours (Alkaline Battery Operating when)
Detection Part Shape□12.7 Port
Dimensions · Weight200(W)×120(D)×96(H) mm / Approx. 2.6 kg
Standard accessoriesAngle Adapter (□9.5 Port —□12.7 Port); Check , Calibration Certificate, can Property Body Series Diagram

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

DWT-200 is CEDAR forTwisted wrench torque checkDigital tox wrench tester. In addition to the PP mode of actual torque, there is a torque wrenchActions (tick) torque.%%2which is suitable for the routine confirmation and periodic review of preset torque wrench; the detection is □ 12.7, which is randomly attached to the □ 9.52 square-dispensive adapter.Stamp. Reference: 12.7, PD. Reference values: 9.5.

Application Scope

The action torque confirmation, routine count and cycle verification applicable to preset torque wrench (tang)

Key Features

PD with PP mode to measure actual torque applied and PD mode to measure wrench movement torqueCharlie

Randomly attached out-of-the-deck conversion adapter (□ 12.7 mother mouth 9.5)

Battery-driven, continuously using approximately 20 hours (alkali cell)

Place 5 minutes auto-cut

Notes on Specification Terminology

The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARDWT-200) the series is DWT-200, and the difference item for other models in the series is shown separately in that model entry

PP mode and PD mode

PP (peaks maintained)(a) Torillus to measure the actual application of the compacted elementsPD (peak down and hold)The point of drop in the moment used to capture the wrench " pull " is to measure the wrench movement (set) torque. Check the preset wrench for accuracy, mainly by reading the PD mode

Checkout and fit

Checkout Department As□ 12.7 Mother mouthwhich can be fitted directly to the side of the wrench with the opposite of 12.7 mm; randomly attached to the □ 9.5 mother mouth - □ 12.7 common mouth angular adaptor that can be compatible with the side of the wrench number one. The home-page measurement is CW (right-hand), which is applied to the right-stretched wrench

Standard Accessories and Ordering

Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR DWT-200The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp

FAQ

Q: What is the difference between the PD mode and the PP mode?Spwx1 mode?S
A: PP measured the actual torque peak; PD captured the torque from the point of turn to the point of decline, used to detect the movement (truck) of the wrench. The preset tow wrench mode is more appropriate. Reference: PD

Q: How many miles can you measure?
A: determination range 7.0 — 200.0 N·m, accuracy 0.5% (499 digit below 3 § § § ). ZX ZX Z ZX Z

Q: Power and continuity?
A: Use of the BASIC cell 4 section, with approximately 20 hours of continuous use; place 5 minutes of automatic shutdown. Reference: 5

Q: Can you measure left?
A: The official specifications indicate the direction of the determination CW (right direction) and the aircraft is facing the right turn around to tighten the condition

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)