CEDAR DI-1M-IP50 Torque Testers (Model DI-1M-IP50) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR DI-1M-IP50 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: CEDAR | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measurement Range | 0.30~50 N·m |
|---|---|
| Detection Part Weight | Approx. 600 g |
| Standard Accessories ( Model) | Case |
| Accuracy | ±0.5%(499 digit or less ±3 digit) |
| Display | LED 4 Digits digits Display |
| Measuring Direction | CW-CCW(Right · Left Direction) |
| Measurement Mode | Track, Peak, Peak-Down(70 digit or more ) |
| Display Zero Setting | per Setting Time Automatic Zero (0.5~3.0 s); Auto Clear Time 0.5~3.0 s (0.5 s Interval), 0.0 s is Manual Zero Setting |
| Counting Device | Measuring Range 0~99 ; Measurement Time 0.1~9.9 s; LED Display |
| Data output | ASCII division Type (Baud Rate 19200) |
| Power Supply | NiMH Battery (5 minutes No Operation Auto Power-off) |
| Charging Time / Operating Time | Charging Approx. 3 hours / Maximum Charging when Continuous Approx. 8 hours |
| Instrument Gauge Part Dimensions | 146(W)×115(D)×48(H) mm(excluding Part) |
| Instrument Gauge Part Weight | 600 g |
| Cable Length | Standard 1 m(-L1), with 2 m(-L2), 4 m(-L4) optional |
| Standard accessories | Case, Dedicated Charger, Check , Calibration Certificate, can Property Body Series Diagram |
| Operating Notes (Official) | Measurement Wrench when at Rated Torque 60% or less Operating; Order when Specified Cable Length and toward (Output Port Specifications) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DI-1M-IP series CEDAR-DialScreA big torque shock tool like a shock wrenchthe split digital torque tester: the display (mechanical) is partially separated from the checkout, connected by the check-out cable (Standard 1 m, optional 2 m/4 m) ) XQuest he instrument can be placed in a viewable position on the line of production; built-inStrike Countdisplays the number of blows and torque and supports the Peak-Down mode check manual preset torque torque
The output torque and number of hits applied to shock wrench, torque electric/air tool can also be used for preset torque torque check
Strike counters show the number of hits and torque values at the same time
Peak-Down mode to check manual preset torque wrench and so onCharlieColectonStance
Autocut and autozero
Data acquisition software can be downloaded free of charge
The meter section is partially separated from the checkout, the check cable is marked with 1 m, and 2 m/4 m is optional
The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARDI-1M-IP50The difference item in the same series as the other models is shown separately in the model entry. Reference: IP50, DI-1M, DI-1M-IP200/DI-1M-IP500
Three models share the same instrumentation department (146(W) x 115(D) x 48(H) X, 600 g) x at varianceCheckout DepartmentIP50 for 0.30 — 50 N·m (exit department approximately 600 g), IP200 for 3.0 — 200 N·m (execution approximately 1.7 kg), : 0.30 — 1.7 kg : : : : : : : : : : : : : IP500 is 3.0 500 N·m (approximately 3.1 kg). Select the type by the nominal torque of the shock tool. Official reminder: measure the shock wrench by setting the torqueBelow 60%CharliesUse
The meter is partially separated from the checkout and can be fixed to the position during the operation, and the meter is placed in the operator's sight, avoiding shock vibration readings and facilitating the sharing of the same meter over multiple points of the production line. — Cable length is specified at the time of ordering (L1 standard 1 m, L2 for 2 m, and L4 for 4 m). Q Que
Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR DI-1M-IP50The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp
Q: What are the differences between the three models?!!?
A: The meter is identical, distinguishing the amount of time and weight in the checkout from the mass in IP50 for 0.30 ~ 50 N·m, IP200 for 3.0 ~ 200 N·m, X IP500 is 3.0 500 N·m. Selects by the nominal torque of the shock tool and uses the torque not exceeding the rated value 60 per cent
Q: How long is the cable? Can we increase it?
A: Standard 1 m (model suffix - L1), with 2 m (-L2) and 4 m (-L4) selected and specified at the time of ordering. ue Queue Que Que Que Que Que
Q: How many hits do you read?
A: A built-in strike counter, measuring range 0 99 strike, measuring time 0.1 ~ 9.9 seconds, displayed in LED, managed with torque values
Q: Battery and continuation?!!
A: Nickel hydrogen batteries charged approximately 3 hours, used at maximum charge for approximately 8 hours, and 5 minutes unoperated automatic shutdown
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.