Home › Products

Product Overview

CEDAR DI-1M-IP500 Torque Testers (Model DI-1M-IP500) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR DI-1M-IP500 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR DI-1M-IP500 Torque Testers

Technical Specifications

Measurement Range3.0~500 N·m
Detection Part WeightApprox. 3.1 kg
Accuracy±0.5%(499 digit or less ±3 digit)
DisplayLED 4 Digits digits Display
Measuring DirectionCW-CCW(Right · Left Direction)
Measurement ModeTrack, Peak, Peak-Down(70 digit or more )
Display Zero Settingper Setting Time Automatic Zero (0.5~3.0 s); Auto Clear Time 0.5~3.0 s (0.5 s Interval), 0.0 s is Manual Zero Setting
Counting DeviceMeasuring Range 0~99 ; Measurement Time 0.1~9.9 s; LED Display
Data outputASCII division Type (Baud Rate 19200)
Power SupplyNiMH Battery (5 minutes No Operation Auto Power-off)
Charging Time / Operating TimeCharging Approx. 3 hours / Maximum Charging when Continuous Approx. 8 hours
Instrument Gauge Part Dimensions146(W)×115(D)×48(H) mm(excluding Part)
Instrument Gauge Part Weight600 g
Cable LengthStandard 1 m(-L1), with 2 m(-L2), 4 m(-L4) optional
Standard accessoriesCase, Dedicated Charger, Check , Calibration Certificate, can Property Body Series Diagram
Operating Notes (Official)Measurement Wrench when at Rated Torque 60% or less Operating; Order when Specified Cable Length and toward (Output Port Specifications)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

DI-1M-IP series CEDAR-DialScreA big torque shock tool like a shock wrenchthe split digital torque tester: the display (mechanical) is partially separated from the checkout, connected by the check-out cable (Standard 1 m, optional 2 m/4 m) ) XQuest he instrument can be placed in a viewable position on the line of production; built-inStrike Countdisplays the number of blows and torque and supports the Peak-Down mode check manual preset torque torque

Application Scope

The output torque and number of hits applied to shock wrench, torque electric/air tool can also be used for preset torque torque check

Key Features

Strike counters show the number of hits and torque values at the same time

Peak-Down mode to check manual preset torque wrench and so onCharlieColectonStance

Autocut and autozero

Data acquisition software can be downloaded free of charge

The meter section is partially separated from the checkout, the check cable is marked with 1 m, and 2 m/4 m is optional

Notes on Specification Terminology

The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARDI-1M-IP500The difference item in the same series as the other models is shown separately in the model entry. Reference: IP50, DI-1M, DI-1M-IP200/DI-1M-IP500

How do we distinguish the three-track?!

Three models share the same instrumentation department (146(W) x 115(D) x 48(H) X, 600 g) x at varianceCheckout DepartmentIP50 for 0.30 — 50 N·m (exit department approximately 600 g), IP200 for 3.0 — 200 N·m (execution approximately 1.7 kg), : 0.30 — 1.7 kg : : : : : : : : : : : : : IP500 is 3.0 500 N·m (approximately 3.1 kg). Select the type by the nominal torque of the shock tool. Official reminder: measure the shock wrench by setting the torqueBelow 60%CharliesUse

On-site value of the segment structure

The meter is partially separated from the checkout and can be fixed to the position during the operation, and the meter is placed in the operator's sight, avoiding shock vibration readings and facilitating the sharing of the same meter over multiple points of the production line. — Cable length is specified at the time of ordering (L1 standard 1 m, L2 for 2 m, and L4 for 4 m). Q Que

Standard Accessories and Ordering

Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR DI-1M-IP500The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp

FAQ

Q: What are the differences between the three models?!!?
A: The meter is identical, distinguishing the amount of time and weight in the checkout from the mass in IP50 for 0.30 ~ 50 N·m, IP200 for 3.0 ~ 200 N·m, X IP500 is 3.0 500 N·m. Selects by the nominal torque of the shock tool and uses the torque not exceeding the rated value 60 per cent

Q: How long is the cable? Can we increase it?
A: Standard 1 m (model suffix - L1), with 2 m (-L2) and 4 m (-L4) selected and specified at the time of ordering. ue Queue Que Que Que Que Que

Q: How many hits do you read?
A: A built-in strike counter, measuring range 0 99 strike, measuring time 0.1 ~ 9.9 seconds, displayed in LED, managed with torque values

Q: Battery and continuation?!!
A: Nickel hydrogen batteries charged approximately 3 hours, used at maximum charge for approximately 8 hours, and 5 minutes unoperated automatic shutdown

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)