Home › Products

Product Overview

CEDAR WDIS-RL6 Torque Testers (Model WDIS-RL6) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR WDIS-RL6 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR WDIS-RL6 Torque Testers

Technical Specifications

Measurement Range0.020~6.000 N·m
Measurement UnitN·m / cN·m
Standard Accessories ( Model)digits Bit #1, #2; Bit Base; Single toward Bit Base
Accuracy±0.5%(499 digit or less ±3 digit)※ Measurement in Hold Temperature Setting
Sampling Period1000 Data /1 s
Measuring DirectionCW-CCW(Right · Left Direction)
Measurement ModePeak Hold PP(Hold Input Peak)/ Peak under PD(Hold Peak)/ Real-time Output C(Approx. 180 Data /1 s, can Measure Torque Wave )/ TR(Direct Display Load Torque Value, Measurement when not Output Data)——PP, PD, C supports with Wire and Wireless Output
Data outputwith Wire (ASCII division Type) or Wireless (requires with Wireless WM2.4)
Memory FunctionsMaximum 800 records
Pass/Fail Judgment Functionabove · Lower Limit Value can at Measuring Range internal Setting (Judgment only at Peak Mode when )
Standard accessoriesDetector, Detector Cable, AC Adapter, Rubber ×4, Check // can Property Body Series Diagram
Power SupplyAC Adapter Direct Power Supply or 5 No. Battery 4 cells
Application (Official)Measurement Screw Torque and Torque
Accuracy (Official )Measurement in Hold Temperature Setting

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

WDIS-RL series CEDAR for measurementScrews are stomping and flexing.!!Digital tox tester with a four-stage range covering 0.20 mN m-10 N·m. In addition to the tightness of direction, it also measures the return direction (lunch) torque, which is appropriate for the evaluation of the stunner state;_ Data output is both wired and wireless, with maximum 800 bars stored, and the upper and lower limits set for eligibility determination..ScopeScene Scene ScopeScene

Application Scope

Measurements applied to screw-strain and loose torque can be used for stun mass assessment and torque management

Key Features

It's measurable to twist the torque and the torque

Colour display displays multiple messages__BAR__Functuary

Data output tags USB and RS232C

Wireless modules are optional to allow for wireless transmission of measurements

The same value as the sine qua non can be set to a maximum of 10 channels

Convergence is color-based and easily identifiable%

AC adaptor or 4 dry cell No. 5 poweredSpwxSpKS

Notes on Specification Terminology

The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARWDIS-RL6) the series is WDIS-RL005/WDIS-RL05/WDIS-RL6/WDIS-RL10, and the difference item for other models in the series is shown separately in that model entry

Four-track differential in accuracy

RL005 for 0.20 50.00 mN mm RL05 for 2.0 500.0 mN mm RL6 for 0.020 6.000 N·m, RL10 for 0.20 10.00 N·m. NoteThe accuracy of RL005 is 2.0%0.3 mN m -X-X-X-QZ-X-X-X-X-X-X-X-X-X-X-X-X-Z-Z-Zthe remaining model is 0.5 per cent (499 § 3 § §) is the difference item clearly indicated in the official specification table

The official note to the scope of the RL005, "Note 2 ", is selected and accepted using the official sample..Screts and acceptances are based on the official sample

Value of loose torque measurements%

The mass of the thread link depends not only on the twisting of the thread, but also on its ease to relax after the stress. This series measures the twisting of the twist of the twist and the return direction, which is used to assess the state of the screw and the reliability of the compact;_ RL6/RL10 is also attached to the head and one-way header, RL10 is also accompanied by 2 with an auxiliary handle to allow for a larger torque

Standard Accessories and Ordering

Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR WDIS-RL6The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp

FAQ

Q: Can you measure the torque?
A: Yes. This series is officially used for "Standing and Thin Toggles of the Snail" and the measurement direction supports CW-CCW..Stamps of the Sluttons.Stands of the Swirls

Q: Why not the same exactness of RL005?
A: The accuracy of RL005 in the official specification table is marked as 2.0%0.3 mN mm, 2.0 0.3 ZX The remaining model is 0.5 per cent (3 § § below 499 §) which is the original official difference, and the selection is evaluated accordingly

Q: What are the annexes?
A: Randomly attached checkers, checker cables, corresponding batches (RL005/RL05 for #0, #1; RL6/RL10 for #1, #2), #2 for #1),-A: # for #ZXCXX for # Batch seat, single-way batch seat (RL6/RL10), auxiliary handle X (RL10), AC adapter, rubber foot pad X and inspection document.Screech X-Screech X-ScreenScreech X-Screak X-Stamp X-Stamp X-Stamp X-Stamp X-Stamp. Reference: 2, 4

Q: Can data be wireless?
A: Yes, radio module WM2.4 is selected for wireless transmission, with a group of up to 15 connected to the 15 platform; also support USB and RS232C cable output.ScreechScreaksZ ncerStances

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)