Home › Products

Product Overview

CEDAR WDISR-IP1500 Digital Torque Tester (Model WDISR-IP1500) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR WDISR-IP1500 battery-powered digital torque tester, 20-1500 N.m, +/-0.5%, 1000 data/s, wired or optional wireless output.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR WDISR-IP1500 Digital Torque Tester

Technical Specifications

Measurement Range20~1500 N·m
Measurement UnitN·m
Accessories ( Model)See the original manufacturer datasheet
Accuracy±0.5%(499 digit or less ±3 digit)※ Measurement in Hold Temperature Setting
Sampling Period1000 Data /1 s
Measuring DirectionCW-CCW(Right · Left Direction)
Measurement ModePeak Hold PP(Hold Input Peak)/ Peak under PD(Hold Peak)/ Real-time Output C(Approx. 180 Data /1 s, can Measure Torque Wave )/ TR(Direct Display Load Torque Value, Measurement when not Output Data)——PP, PD, C supports with Wire and Wireless Output
Data outputwith Wire (ASCII division Type) or Wireless (requires with Wireless WM2.4)
Memory FunctionsMaximum 800 records
Pass/Fail Judgment Functionabove · Lower Limit Value can at Measuring Range internal Setting (Judgment only at Peak Mode when )
Standard accessoriesDetector, Detector Cable, AC Adapter, Rubber ×4, Check // can Property Body Series Diagram
Power Supplybuilt-in Battery (Continuous Time Approx. 12 hours, Charging Time Approx. 3 hours)
Rated Input Voltage12V DC
Auto Power-off10 minutes not Operating Rear Power Supply OFF
Application (Official)Screw in, Measurement Torque Screw Blade, Torque Wrench etc. Tool Torque

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The CEDAR WDISR-IP1500 is the largest-capacity model of the WDISR-IP series of digital torque testers from Sugisaki Meter (CEDAR) — the built-in-battery version of WDIS-IP. It measures 20–1500 N·m at ±0.5% accuracy (±3 digit below 499 digit, with temperature held constant during measurement), in N·m, and is used to measure the tightening torque of torque screwdrivers, torque wrenches and similar fastening tools. The internal rechargeable pack runs about 12 hours from a roughly 3-hour charge at a rated input of 12V DC, so the instrument moves freely between workstations without a mains lead.

Data output is available wired (ASCII) or wireless with the optional WM2.4 module, at a sampling period of 1000 data per second. Six capacities share the same display unit and differ only in detector range, covering 0.5 mN·m to 1500 N·m across the series. For help choosing a detector range, please contact our engineers.

Key Features

Typical Applications

Measuring, judging and managing the torque of fastening tools where the operator must move between stations or where no fixed mains supply is available.

Model Selection & Reference Figures

The six models share one display unit and differ in detector range: IP05 is 2.0–500.0 mN·m, IP5 is 0.020–5.000 N·m, IP50 is 0.20–50.00 N·m, IP200 is 2.0–200.0 N·m, IP500 is 2.0–500.0 N·m and IP1500 is 20–1500 N·m (supplied with a handle). Compared with WDIS-IP (AC adapter / dry cells), WDISR-IP suits mobile inspection and sites without convenient power. Standard accessories for this model: detector, detector cable, AC adapter, four rubber feet, and inspection certificate / configuration certificate / traceability chart. Measuring direction CW-CCW (right and left). State "CEDAR (Sugisaki Meter) + model" when ordering, for example CEDAR WDISR-IP1500.

Frequently Asked Questions

Q: WDISR-IP or WDIS-IP?
A: Functions and ranges are identical; the difference is power. WDISR-IP uses a built-in rechargeable battery (about 12 hours) for mobile or field use, while WDIS-IP uses an AC adapter / AA cells and suits a fixed station.

Q: How is data exported and how much can be stored?
A: USB and RS232C wired outputs (ASCII) are standard, with optional WM2.4 wireless transfer. Memory holds up to 800 readings, and judgement conditions can be stored in up to 10 channels.

Q: How long does the battery last?
A: Official figures are about 12 hours of continuous operation on a full charge, about 3 hours to charge, and auto power-off after 10 minutes idle.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the CEDAR WDISR-IP / WDIS-IP range with selection advice, quotations, demonstrations, detectors, cables, wireless modules and after-sales support.

Specification Sources

Values above are taken item by item from the official Sugisaki Meter (CEDAR) WDISR-IP specification PDF (the official specification table) and product page, with no unit conversions or inferred values; items shown as "-" or absent from the official table are likewise left blank. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time or a demonstration, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)