Home › Products

Product Overview

CEDAR WDISR-RL005 Torque Testers (Model WDISR-RL005) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR WDISR-RL005 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: CEDAR | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

CEDAR WDISR-RL005 Torque Testers

Technical Specifications

Measurement Range0.20~50.00 mN·m
Measurement UnitmN·m / cN·m
Accuracy±2.0%±0.3 mN·m
Standard Accessories ( Model)digits Bit #0, #1
Sampling Period1000 Data /1 s
Measuring DirectionCW-CCW(Right · Left Direction)
Measurement ModePeak Hold PP(Hold Input Peak)/ Peak under PD(Hold Peak)/ Real-time Output C(Approx. 180 Data /1 s, can Measure Torque Wave )/ TR(Direct Display Load Torque Value, Measurement when not Output Data)——PP, PD, C supports with Wire and Wireless Output
Data outputwith Wire (ASCII division Type) or Wireless (requires with Wireless WM2.4)
Memory FunctionsMaximum 800 records
Pass/Fail Judgment Functionabove · Lower Limit Value can at Measuring Range internal Setting (Judgment only at Peak Mode when )
Standard accessoriesDetector, Detector Cable, AC Adapter, Rubber ×4, Check // can Property Body Series Diagram
Power Supplybuilt-in Battery (Continuous Time Approx. 12 hours, Charging Time Approx. 3 hours)
Rated Input Voltage12V DC
Auto Power-off10 minutes not Operating Rear Power Supply OFF
Application (Official)Measurement Screw Torque and Torque

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

The WDISR-RL series is a built-in battery version of WDIS-RL for measuringScretsScreaksThe screws are twisting and twistingThe built-in charge cell (approximately 12 hours continuous, approximately 3 hours charged), the rated input voltage 12V DC,,.Cold charger.Cold charger.Charlie.Charlie.Cloose charger.C.C.C.C.C.C.C.C.C.C.S.S.A.S.S The four-stage process covers 0.20 mN m ~ 10 N·m and is suitable for field movement detection of the screw-stress state

Application Scope

Field measurements applicable to screw-stuck and loose torque can be used for stun-stun quality assessment..Stight-stringsStight

Key Features

It's measurable to twist the torque and the torque

Internal battery power, easy to use on site

Data output tags USB and RS232C

Wireless modules are optional to allow for wireless transmission of measurements

The same value as the sine qua non can be set to a maximum of 10 channels

10 minutes without automatic shutdown.Split by Spw

Notes on Specification Terminology

The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARWDISR-RL005) the series is WDISR-RL005/WDISR-RL05/WDISR-RL6/WDISR-RL10, and the difference item for other models in the series is shown separately in that model entry

Four-track differential in accuracy

RL005 for 0.20 50.00 mN mm, RL05 for 2.0 500.0 mN mm,sSpunners for 2.0 XZX MN mm, of RL6 for 0.020 6.000 N·m, RL10 for 0.20 10.00 N·m. Consistency with WDIS-RLThe accuracy of RL005 is 2.0%0.3 mN m -X-X-X-QZ-X-X-X-X-X-X-X-X-X-X-X-X-Z-Z-Zthe remaining model is 0.5% (3 § § below 499 § § ° § § °). ZXZ ZXZX

Move detection scene

Internal batteries, unextracted power attachments, suitable for hard-fixing point checks at different production line locations or client sites; CW-CCW two-way measurements can be evaluated simultaneously for stint and flexing. RL10 with auxiliary handles x 2, which facilitates the imposition of larger torque.S

Standard Accessories and Ordering

Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR WDISR-RL005The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp

FAQ

Q: The difference between WDISR-RL and WDIS-RL?
A: Same function and mass, WDISR-RL built-in batteries (approximately 12 hours continuous) suitable for mobile detection; WDIS-RL powered by AC adapter/dry battery. / Dry Bat

Q: Can you measure the torque?
A: Yes. This series supports a two-way survey of CW-CCW, which is officially used to measure the twisting and the loose twisting..ScretsSt

Q: What does the annex include?!??
A: outlet, outlet cable, corresponding batch (#0/#1 or #1/#2), batch, one-way batch, AC adapter, , X-X-X-X-X-X-X-X-X-X-X- Rubber foot pads x 4, RL10 with additional auxiliary handles x 2, and inspection documents

Q: Battery and charge?
A: A built-in battery with a continuous operation time of about 12 hours (full charge time) and a charge time of about 3 hours; 10 minutes without automatic shutdown. hours; 10 minutes without automatic shutdown

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

CEDAR DI-12-SL02 Torque Testers
Torque Testers

CEDAR DI-12-SL02 Torque Testers

DI-12-SL02
└ CEDAR (Japan)
CEDAR DI-12-SL4 Torque Testers
Torque Testers

CEDAR DI-12-SL4 Torque Testers

DI-12-SL4
└ CEDAR (Japan)
CEDAR CP-10 Torque Testers
Torque Testers

CEDAR CP-10 Torque Testers

CP-10
└ CEDAR (Japan)
CEDAR CP-1 Torque Testers
Torque Testers

CEDAR CP-1 Torque Testers

CP-1
└ CEDAR (Japan)
CEDAR NTS7-RT2 Torque Testers
Torque Testers

CEDAR NTS7-RT2 Torque Testers

NTS7-RT2
└ CEDAR (Japan)
CEDAR NTS7-RT05 Torque Testers
Torque Testers

CEDAR NTS7-RT05 Torque Testers

NTS7-RT05
└ CEDAR (Japan)