CEDAR WIMS-IP50 Digital Torque Tester (Model WIMS-IP50) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR WIMS-IP50 digital torque tester for impact tools, 1.00-50.00 N.m (1.00-30.00 N.m impact), blow counter, 10 setting groups.
Brand: CEDAR | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measuring Range ( Tool) | 1.00~50.00 N·m |
|---|---|
| Measuring Range ( Tool) | 1.00~30.00 N·m |
| Measurement Unit | cN·m / N·m |
| Standard Accessories ( Model) | Sleeve Adapter FNA-3D |
| Accuracy | ±0.5%(499 digit or less ±3 digit) |
| Sampling Period | 1000 Data /1 s |
| Data output | Communication (ASCII division Type) or Wireless (requires with Wireless ) |
| Measurement Mode | Peak Hold PP(Hold Input Peak)/ Peak under PD(Hold Peak)/ TR(Direct Display Load Torque Value, not Output Data)——PP, PD supports and Wireless Output |
| Auto Power-off | 10 minutes not Operating Rear Power Supply OFF |
| Power Supply | built-in Battery (Continuous Time Approx. 12 hours, Charging Time Approx. 3 hours) |
| Setting | up to 10 groups |
| Accessories | Sleeve Adapter FNA-3D(IP50)/ Rotation Replace Adapter NA34(IP200)/NA46(IP500)/NA48(IP500 by external incl. CPH-P-TB8); Detector Cable 10P-xMF(x Display Length); AC Adapter 6A-061WP12; Rubber B8-4(4 pcs) |
| with Part | Check , Calibration Certificate, can Property Body Series Diagram (※All at 1 ) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The CEDAR WIMS-IP50 is a digital torque tester from Sugisaki Meter (CEDAR) designed for impact wrenches and other impact tools. A built-in blow counter manages torque and blow count together, so an impact run can be assessed by both its final torque and the number of impacts that produced it. It measures 1.00–50.00 N·m for non-impact tools and 1.00–30.00 N·m for impact tools, in cN·m / N·m, at ±0.5% accuracy (±3 digit below 499 digit) with a sampling period of 1000 data per second.
Measurement sensitivity can be adjusted to correct displayed values for different impact waveforms, and up to 10 sets of settings can be saved. A colour LCD, USB and RS232C ports, support for an optional wireless module, and a built-in battery (about 12 hours continuous use, about 3 hours to charge) round out the instrument. For help matching a detector to your impact tool, please contact our engineers.
Combined management of torque and blow count for impact wrenches and electric impact tools; the instrument also measures non-impact fastening tools within its non-impact range.
The official specification splits measuring range into two rows, "non-impact tools" and "impact tools", with a lower upper limit for impact tools because they build torque through repeated blows. For WIMS-IP50 the ranges are 1.00–50.00 N·m (non-impact) and 1.00–30.00 N·m (impact); for WIMS-IP1500 they are 100–1500 N·m and 100–600 N·m respectively. Always use the impact-tool row when measuring impact tools. The four-model series is WIMS-IP50 / WIMS-IP200 / WIMS-IP500 / WIMS-IP1500. Standard accessories differ by model: socket adapter FNA-3D (IP50), conversion adapters NA34 (IP200), NA46 (IP500) and NA48 (models other than IP500 with handle CPH-P-TB8); detector cable 10P-xMF (x denotes length); AC adapter 6A-061WP12; four rubber feet B8-4. Inspection certificate, calibration certificate and traceability chart are supplied together on one sheet. State "CEDAR (Sugisaki Meter) + model" when ordering, for example CEDAR WIMS-IP50.
Q: Why is the impact-tool range smaller?
A: That is how the official specification table is written: measuring range is split into a non-impact row and an impact row, with the impact upper limit lower (IP1500 is 100–1500 / 100–600 N·m). Measure impact tools within the impact row.
Q: How is blow count managed, and how many settings can be saved?
A: The built-in blow counter displays and manages torque and blow count together, and measurement sensitivity can be adjusted to match the tool's waveform. Up to 10 groups of settings can be saved and recalled when changing tools.
Q: What interfaces and power are provided?
A: USB and RS232C ports, an optional wireless module, and a built-in battery giving about 12 hours of continuous operation (about 3 hours to charge).
Guangzhou Yunke Electronic Co., Ltd. supplies the CEDAR WIMS-IP range with selection advice, quotations, demonstrations, socket adapters, detector cables and after-sales support.
Values above are taken item by item from the official Sugisaki Meter (CEDAR) WIMS-IP specification PDF and product page, with no unit conversions or inferred values; items shown as "-" or absent from the official table are likewise left blank. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time or a demonstration, please contact our engineers.