CEDAR WIMS-IP1500 Torque Testers (Model WIMS-IP1500) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. CEDAR WIMS-IP1500 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: CEDAR | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measuring Range ( Tool) | 100~1500 N·m |
|---|---|
| Measuring Range ( Tool) | 100~600 N·m |
| Measurement Unit | N·m |
| Standard Accessories ( Model) | Rotation Replace Adapter NA48, CPH-P-TB8 |
| Accuracy | ±0.5%(499 digit or less ±3 digit) |
| Sampling Period | 1000 Data /1 s |
| Data output | Communication (ASCII division Type) or Wireless (requires with Wireless ) |
| Measurement Mode | Peak Hold PP(Hold Input Peak)/ Peak under PD(Hold Peak)/ TR(Direct Display Load Torque Value, not Output Data)——PP, PD supports and Wireless Output |
| Auto Power-off | 10 minutes not Operating Rear Power Supply OFF |
| Power Supply | built-in Battery (Continuous Time Approx. 12 hours, Charging Time Approx. 3 hours) |
| Setting | up to 10 groups |
| Accessories | Sleeve Adapter FNA-3D(IP50)/ Rotation Replace Adapter NA34(IP200)/NA46(IP500)/NA48(IP500 by external incl. CPH-P-TB8); Detector Cable 10P-xMF(x Display Length); AC Adapter 6A-061WP12; Rubber B8-4(4 pcs) |
| with Part | Check , Calibration Certificate, can Property Body Series Diagram (※All at 1 ) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
WIMS series CEDAR-DialScreImpact tools like shock wrenchChanDigital tox tester, built-in strike counter, can holdTorque and hit times managed%The measurement senses can be adjusted to correct the values and can save the maximum set value of the 10 group; the colour liquid crystal shows that there are two communication ports, USB/RS232C, and supports the additional wireless modules; ; Q2 Q ;Stight X-Stock X-Stock X-Stock X-St Internal battery drive (approximately 12 hours continuous), with a four-stage range covering 50 ~ 1500 N·m
Integrated management of torque and number of hits, such as shock wrench, electric shock tools, can also be used to detect non-shock type of strangling tools.Ass
Color liquid crystal, easy to readCol
There are a lot of external control orders
The strike counter can manage the torque with the number of hits
The measure is capable of changing the senses to adjust the values%
Maximum value to save 10 group set.%1%22222
Has 2 communications port (USB/RS232C)SpwxS
Support wireless modules (sales)
The above parameters are itemized from the "se" table and the "supplier" of the official product specification PDF, which is not converted in units and is not extrapolated; This page is also not filled in for items that are not listed in the official specification form in the form "- ". Reference: CEDARWIMS-IP1500The difference item in the same series as the other models is shown separately in the model entry. Reference: IP50, WIMS-IP200/WIMS-IP500/WIMS-IP1500, WIMS
The official specifications divide the measurements into two lines:!?Non-Stock Tool and Impact ToolChannelThe latter is lower in scale - because the shock tool is used in a manner that is officially given as a measure of impact tool, by repeatedly striking cumulative torque. — — — — — — — — — — — — — — — — — For example, WIMS-IP50 non-shock 1.00 — 50.00 N·m, 1.00 — 30.00 N·m; WIMS-IP1500 Non-shock 100 1500 N·m , 100 600 N·m
The machine can adjust the display values by changing the measurement senses to the wave shape properties of different shock instruments; maximum set values can be savedGroup 10the tool can be replaced by direct call to the corresponding settings, reducing duplication
Please indicate "CEDAR (CEDAR meter)+ model" when ordering, for exampleScretsScCEDAR WIMS-IP1500The official pricing is not included on this page. Please contact Guangzhou Yunke Electronics Co., Ltd. for the price.Tppppp
Q: Why is the "shock tool" less time-consuming? Q: Why
A: This is the original formulation of the official specification table: the range of measurements is divided between "non-shock tools" and "shock tools".! The scale ceiling for shock type tools is lower than for non-shock type (e.g. IP1500 for 100 ~ 1500/100 ~ 600 N·m). The impact measurement tool is used in the range of the shock tool line.!
Q: How do you manage the number of strikes? Q: How do you manage the number of strikes
A: A built-in strike counter, which displays and manages torque with the number of hits; the measurement of the sensitivity can be adjusted to match the wave shape of the different tools
Q: How many sets of settings can be saved?
A: Up to 10 group, which can be called directly when replacing the measure tool, without duplicated settings
Q: Interface with power?
A: Two communication ports, USB and RS232C, are available to support the sale of additional wireless modules; built-in batteries with approximately 12 hours of continuous action (with a charge of approximately 3 hours)
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.