Mitutoyo 2902A Measuring Tools (Model 2902A) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 2902A Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Mitutoyo | Category: Mitutoyo Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Brand / Origin | Mitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan) |
|---|---|
| Series | Mitutoyo 2 Series Standard Type Pointer Type Indicator (Dial Indicator) |
| Order No. | 2902A |
| Rear Type | Back cover with lug |
| to Order No. | 2902AB(Flat back cover) |
| Graduation | 0.01 mm |
| Measuring Range | 10 mm |
| Scale | 100-0( toward Reading) |
| Length Needle 1 Travel per Revolution | 1 mm |
| Indication Error · 1 / 10 Travel per Revolution | 5 µm |
| Indication Error · 1 / 2 Travel per Revolution | 9 µm |
| Indication Error · 1 Travel per Revolution | 10 µm |
| Indication Error · Full Range | 13 µm |
| Hysteresis | 3 µm |
| Repeatability | 3 µm |
| Measuring Force | 1.4 N or less |
| Model Characteristics | above points Type |
| Gauge Revolution Outer Diameter | ø57 mm |
| Accuracy | toward Position (Contact Point toward under) |
| Supplied Part | Check |
| Warranty | Subject to terms of sale |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
2902A is the current cargo number, fractional value, for the standard pointer table (percentage) of the Mitutoyo Mitutoyo 2 series X-Tracturing0.01 mmmeasure rangeScreen10 mmscale specification100-0 (reverse reading)with long needles per round of 1 mm in the back ofPut your ear back onmodel-specificSystA little more of a buffer。
The following parameters are taken from the specification table of the official goods catalogue "2 series standard pointer table" and have not been converted or rewritten. Official data on the quality of the subjects of this series vary from one batch to another, so this table does not include this; if this data is needed, please use randomly checked accomplishment books.Stats of the data collection. Reference: Mitutoyo
2902A as inverse reading typethe scale is 100-0, the on-board reading is in the opposite direction to the conventional table of instructions. when the device can only be rewinded because of the space restrictions, or when the head must be pointed up against the base. The operator's viewing of the disk has changed accordingly, and the conventional typitude has caused problems with the reverse readings; the reverse reading type is designed for such installed postures, so that the reading direction is consistent with the operator's positive and negative judgement and avoids misinterpretation._ Official full-scale error is13 µm1/10 Circle 5 µm, 1/2 Circle 9 µm, XX X Circle , Z ZX ZX ny 1 Circle 10 µm, return error 3 µm, repeatability 3 µm, and detector 1.4 N
This article readsPut your ear back onParagraph: A glutted installation ear that can be directly placed in a leveraged table or staircase to facilitate rapid disassembly between multiple positions. the exact level, equal specification, and the flat post-deposit number is2902ABThe internal structure of the two is fully consistent with accuracy, and the selection depends only on the manner in which the installation is carried out and the environment in which it is used
Officially, two cargo numbers by backhead form: —Put your ear back onthe outer shell belts are fitted with installed ears and can be fitted directly to a staircase or a leveraged shelf, and be quickly removedFlat Recap%1%2The internal structure is fully aligned with the accuracy scale according to the official specification table, and the selection depends on the way the installation is installed and the environment in which it is used, not on the measurement capability
| Goods number (with ear cover) | Goods (Pilter Recaps) | Tic/ Feature_Technology_Technology_Technology_Technology_T |
|---|---|---|
| 2046A | 2046AB | 0-100 Continuous tic Death Point BufferSpuns-Spuns-Spunners |
| 2046A-09 | 2046AB-09 | 0-100 continuous tic Seismic type ScrellageScrellsS |
| 2047A | 2047AB | 0-50-0 symmetrical scale. Death point buffer typeSpunnersSpunctionsS |
| 2902A | 2902AB | 100-0 Reverse reading. Dead-point bufferScret-Death buffersScreaksS |
| 2310A-10 | 2310AB-10 | 0-100 continuous tic. Gemstone bearing (with axle rotation counter) 100 continuous |
| 2044A | 2044AB | 0-100 Continuous tic Deathpoint buffer (5 mm) |
| 2044A-09 | 2044AB-09 | 0-100 continuous tic earthquake-proof (5 mm) 100 continuous |
| 2045A | 2045AB | 0-50-0 symmetrical scale. Death point buffer (5 mm) |
The 2 standard pointer table is a classic comparative measurement tool for the detection of spatial errors such as plane, parallel, jump, axle and the proper location of the machine bed and work. The standard scale plate is equipped with 57 mm press circle; surface masked coatings are treated to withstand the damage caused by the pollution; the watchring and watchring are closely fitted with the O-type ring and waterproof oils; the axle and the poles are hot and hot; the stainless steel crown gear is not susceptible to deformation
Precision guarantee: Officially stated as indicator tableVertical position (head-down)Each attached performance report is guaranteed. It allows for the measurement of retroactive management
Guangzhou Yunke Electronics Co., Ltd. supply of Mitutoyo Mitutoyo original bulkware, which provides selection, quotations and post-sale support for the 2 series of indicator forms, and the original plant header, as required The selected type is identified by the measurement process (10 mm or 5 mm), the scale and the back cover form
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.