Home › Products

Product Overview

Mitutoyo 2310A-10 Measuring Tools (Model 2310A-10) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 2310A-10 Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Mitutoyo | Category: Mitutoyo Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Mitutoyo 2310A-10 Measuring Tools

Technical Specifications

Brand / OriginMitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan)
SeriesMitutoyo 2 Series Standard Type Pointer Type Indicator (Dial Indicator)
Order No.2310A-10
Rear TypeBack cover with lug
to Order No.2310AB-10(Flat back cover)
Graduation0.01 mm
Measuring Range10 mm
Scale±0-100(Continuous Scale)
Length Needle 1 Travel per Revolution1 mm
Indication Error · 1 / 10 Travel per Revolution5 µm
Indication Error · 1 / 2 Travel per Revolution9 µm
Indication Error · 1 Travel per Revolution10 µm
Indication Error · Full Range15 µm
Hysteresis3 µm
Repeatability3 µm
Measuring Force1.4 N or less
Model CharacteristicsBearing Type
Gauge Revolution Outer Diameterø57 mm
Accuracytoward Position (Contact Point toward under)
Supplied PartCheck
WarrantySubject to terms of sale

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Mitutoyo Mitutoyo 2310A-10 pointer percentage table (pemstone bearing type, eardone, measured range 10 mm)

2310A-10 is the current cargo number (percentage) of the standard pointer table in the Mitutoyo Mitutoyo 2 series. XQyxx XQx0.01 mmmeasure rangeScreen10 mmscale specification0-100 (continuous tic)with long needles per round of 1 mm in the back ofPut your ear back onmodel-specificSystGemstone bearingsScreen。

Technical Specifications

The following parameters are taken from the specification table of the official goods catalogue "2 series standard pointer table" and have not been converted or rewritten. Official data on the quality of the subjects of this series vary from one batch to another, so this table does not include this; if this data is needed, please use randomly checked accomplishment books.Stats of the data collection. Reference: Mitutoyo

This model description

2310A-10 with a rotation counter with a gem bearingAxxThe central disk also has a sub-dotted number of the same axis, which is used to accumulate the integer number of long needles, so that the whole circle does not have to be rounded back by long needles, and the readings are more intuitive and less easily mistreated; the axle bearings of the moving agency use gem bearings, smaller frictions, smaller. The wear and tear are lower and the long-term use allows for better signal stability..Significal-range error is the official-total-range error15 µm1/10 Circle 5 µm, 1/2 Circle 9 µm, XX X Circle , Z ZX ZX ny 1 Circle 10 µm, return error 3 µm, repeatability 3 µm, and detector 1.4 N

Fits for situations where the journey is highly variable and requires continuous observation of the total number of circles, such as a flat size scan, long-haul beat detection, and continuous measurements of the straightness of the machine bed guidance orbit

This article readsPut your ear back onParagraph: A glutted installation ear that can be directly placed in a leveraged table or staircase to facilitate rapid disassembly between multiple positions. the exact level, equal specification, and the flat post-deposit number is2310AB-10The internal structure of the two is fully consistent with accuracy, and the selection depends only on the manner in which the installation is carried out and the environment in which it is used

Select in back-cap form.%

Officially, two cargo numbers by backhead form: —Put your ear back onthe outer shell belts are fitted with installed ears and can be fitted directly to a staircase or a leveraged shelf, and be quickly removedFlat Recap%1%2The internal structure is fully aligned with the accuracy scale according to the official specification table, and the selection depends on the way the installation is installed and the environment in which it is used, not on the measurement capability

Goods number (with ear cover)Goods (Pilter Recaps)Tic/ Feature_Technology_Technology_Technology_Technology_T
2046A2046AB0-100 Continuous tic Death Point BufferSpuns-Spuns-Spunners
2046A-092046AB-090-100 continuous tic Seismic type ScrellageScrellsS
2047A2047AB0-50-0 symmetrical scale. Death point buffer typeSpunnersSpunctionsS
2902A2902AB100-0 Reverse reading. Dead-point bufferScret-Death buffersScreaksS
2310A-102310AB-100-100 continuous tic. Gemstone bearing (with axle rotation counter) 100 continuous
2044A2044AB0-100 Continuous tic Deathpoint buffer (5 mm)
2044A-092044AB-090-100 continuous tic earthquake-proof (5 mm) 100 continuous
2045A2045AB0-50-0 symmetrical scale. Death point buffer (5 mm)

Series characteristics (official) —

The 2 standard pointer table is a classic comparative measurement tool for the detection of spatial errors such as plane, parallel, jump, axle and the proper location of the machine bed and work. The standard scale plate is equipped with 57 mm press circle; surface masked coatings are treated to withstand the damage caused by the pollution; the watchring and watchring are closely fitted with the O-type ring and waterproof oils; the axle and the poles are hot and hot; the stainless steel crown gear is not susceptible to deformation

Precision guarantee: Officially stated as indicator tableVertical position (head-down)Each attached performance report is guaranteed. It allows for the measurement of retroactive management

Selection (official)

Services and support

Guangzhou Yunke Electronics Co., Ltd. supply of Mitutoyo Mitutoyo original bulkware, which provides selection, quotations and post-sale support for the 2 series of indicator forms, and the original plant header, as required The selected type is identified by the measurement process (10 mm or 5 mm), the scale and the back cover form

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Mitutoyo 2045AB Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2045AB Measuring Tools

2045AB
└ Dial Indicators
Mitutoyo 2045A Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2045A Measuring Tools

2045A
└ Dial Indicators
Mitutoyo 2044AB-09 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2044AB-09 Measuring Tools

2044AB-09
└ Dial Indicators
Mitutoyo 2044A-09 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2044A-09 Measuring Tools

2044A-09
└ Dial Indicators
Mitutoyo 2310AB-10 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2310AB-10 Measuring Tools

2310AB-10
└ Dial Indicators
Mitutoyo 2902AB Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 2902AB Measuring Tools

2902AB
└ Dial Indicators