Mitutoyo 2310AB-10 Measuring Tools (Model 2310AB-10) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 2310AB-10 Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Mitutoyo | Category: Mitutoyo Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Brand / Origin | Mitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan) |
|---|---|
| Series | Mitutoyo 2 Series Standard Type Pointer Type Indicator (Dial Indicator) |
| Order No. | 2310AB-10 |
| Rear Type | Flat back cover |
| to Order No. | 2310A-10(Back cover with lug) |
| Graduation | 0.01 mm |
| Measuring Range | 10 mm |
| Scale | ±0-100(Continuous Scale) |
| Length Needle 1 Travel per Revolution | 1 mm |
| Indication Error · 1 / 10 Travel per Revolution | 5 µm |
| Indication Error · 1 / 2 Travel per Revolution | 9 µm |
| Indication Error · 1 Travel per Revolution | 10 µm |
| Indication Error · Full Range | 15 µm |
| Hysteresis | 3 µm |
| Repeatability | 3 µm |
| Measuring Force | 1.4 N or less |
| Model Characteristics | Bearing Type |
| Gauge Revolution Outer Diameter | ø57 mm |
| Accuracy | toward Position (Contact Point toward under) |
| Supplied Part | Check |
| Warranty | Subject to terms of sale |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
2310 AB-10 is the current cargo number, fractional value, for the standard pointer table (percentage) of the Mitutoyo Mitutoyo 2 series XCVXX XCx XS XS X/ XV0.01 mmmeasure rangeScreen10 mmscale specification0-100 (continuous tic)with long needles per round of 1 mm in the back ofFlat Recap%1%2model-specificSystGemstone bearingsScreen。
The following parameters are taken from the specification table of the official goods catalogue "2 series standard pointer table" and have not been converted or rewritten. Official data on the quality of the subjects of this series vary from one batch to another, so this table does not include this; if this data is needed, please use randomly checked accomplishment books.Stats of the data collection. Reference: Mitutoyo
2310 AB-10 with a rotation counter with a gem bearingread with the full circle number to avoid the error in the circle caused by the long needles; the gem bearings are less frictioned, worn low, and the signal value is more stable over time.Sticks for the full-scale indication error.Stands15 µmwhich corresponds to the ear money 2310A-10 level of accuracy, the difference is only in the back cap form. The flat back covers allow integration into the scanners
This article readsFlat Recap%1%2Paragraph: A flat, uncolumn-free backside component that allows magnetic tabletop adsorption or is fixed to a special clip and test. the same level of accuracy, the same type of eardeleton number as the item2310A-10The internal structure of the two is fully consistent with accuracy, and the selection depends only on the manner in which the installation is carried out and the environment in which it is used
Officially, two cargo numbers by backhead form: —Put your ear back onthe outer shell belts are fitted with installed ears and can be fitted directly to a staircase or a leveraged shelf, and be quickly removedFlat Recap%1%2The internal structure is fully aligned with the accuracy scale according to the official specification table, and the selection depends on the way the installation is installed and the environment in which it is used, not on the measurement capability
| Goods number (with ear cover) | Goods (Pilter Recaps) | Tic/ Feature_Technology_Technology_Technology_Technology_T |
|---|---|---|
| 2046A | 2046AB | 0-100 Continuous tic Death Point BufferSpuns-Spuns-Spunners |
| 2046A-09 | 2046AB-09 | 0-100 continuous tic Seismic type ScrellageScrellsS |
| 2047A | 2047AB | 0-50-0 symmetrical scale. Death point buffer typeSpunnersSpunctionsS |
| 2902A | 2902AB | 100-0 Reverse reading. Dead-point bufferScret-Death buffersScreaksS |
| 2310A-10 | 2310AB-10 | 0-100 continuous tic. Gemstone bearing (with axle rotation counter) 100 continuous |
| 2044A | 2044AB | 0-100 Continuous tic Deathpoint buffer (5 mm) |
| 2044A-09 | 2044AB-09 | 0-100 continuous tic earthquake-proof (5 mm) 100 continuous |
| 2045A | 2045AB | 0-50-0 symmetrical scale. Death point buffer (5 mm) |
The 2 standard pointer table is a classic comparative measurement tool for the detection of spatial errors such as plane, parallel, jump, axle and the proper location of the machine bed and work. The standard scale plate is equipped with 57 mm press circle; surface masked coatings are treated to withstand the damage caused by the pollution; the watchring and watchring are closely fitted with the O-type ring and waterproof oils; the axle and the poles are hot and hot; the stainless steel crown gear is not susceptible to deformation
Precision guarantee: Officially stated as indicator tableVertical position (head-down)Each attached performance report is guaranteed. It allows for the measurement of retroactive management
Guangzhou Yunke Electronics Co., Ltd. supply of Mitutoyo Mitutoyo original bulkware, which provides selection, quotations and post-sale support for the 2 series of indicator forms, and the original plant header, as required The selected type is identified by the measurement process (10 mm or 5 mm), the scale and the back cover form
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.