Mitutoyo 2902AB Measuring Tools (Model 2902AB) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 2902AB Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Mitutoyo | Category: Mitutoyo Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Brand / Origin | Mitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan) |
|---|---|
| Series | Mitutoyo 2 Series Standard Type Pointer Type Indicator (Dial Indicator) |
| Order No. | 2902AB |
| Rear Type | Flat back cover |
| to Order No. | 2902A(Back cover with lug) |
| Graduation | 0.01 mm |
| Measuring Range | 10 mm |
| Scale | 100-0( toward Reading) |
| Length Needle 1 Travel per Revolution | 1 mm |
| Indication Error · 1 / 10 Travel per Revolution | 5 µm |
| Indication Error · 1 / 2 Travel per Revolution | 9 µm |
| Indication Error · 1 Travel per Revolution | 10 µm |
| Indication Error · Full Range | 13 µm |
| Hysteresis | 3 µm |
| Repeatability | 3 µm |
| Measuring Force | 1.4 N or less |
| Model Characteristics | above points Type |
| Gauge Revolution Outer Diameter | ø57 mm |
| Accuracy | toward Position (Contact Point toward under) |
| Supplied Part | Check |
| Warranty | Subject to terms of sale |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
2902 AB is the current cargo number (percentage) of the standard pointer table in the Mitutoyo Mitutoyo 2 series. XX0.01 mmmeasure rangeScreen10 mmscale specification100-0 (reverse reading)with long needles per round of 1 mm in the back ofFlat Recap%1%2model-specificSystA little more of a buffer。
The following parameters are taken from the specification table of the official goods catalogue "2 series standard pointer table" and have not been converted or rewritten. Official data on the quality of the subjects of this series vary from one batch to another, so this table does not include this; if this data is needed, please use randomly checked accomplishment books.Stats of the data collection. Reference: Mitutoyo
2902 AB inverted reading typethe scale specification 100-0, which is the opposite of the normal table of instructions, applies to the inverted or head-to-head measurement posture. The official full-scale indicator error is..TextAssSSS13 µmwhich corresponds to the level of accuracy of the typed eardeleton 2902A, the difference is only in the back of the cover form..Spunishment
The flat back cover is flat, so that it can be absorbed or integrated and locked more easily when the back-loading is added to the dedicated staircase
This article readsFlat Recap%1%2Paragraph: A flat, uncolumn-free backside component that allows magnetic tabletop adsorption or is fixed to a special clip and test. the same level of accuracy, the same type of eardeleton number as the item2902AThe internal structure of the two is fully consistent with accuracy, and the selection depends only on the manner in which the installation is carried out and the environment in which it is used
Officially, two cargo numbers by backhead form: —Put your ear back onthe outer shell belts are fitted with installed ears and can be fitted directly to a staircase or a leveraged shelf, and be quickly removedFlat Recap%1%2The internal structure is fully aligned with the accuracy scale according to the official specification table, and the selection depends on the way the installation is installed and the environment in which it is used, not on the measurement capability
| Goods number (with ear cover) | Goods (Pilter Recaps) | Tic/ Feature_Technology_Technology_Technology_Technology_T |
|---|---|---|
| 2046A | 2046AB | 0-100 Continuous tic Death Point BufferSpuns-Spuns-Spunners |
| 2046A-09 | 2046AB-09 | 0-100 continuous tic Seismic type ScrellageScrellsS |
| 2047A | 2047AB | 0-50-0 symmetrical scale. Death point buffer typeSpunnersSpunctionsS |
| 2902A | 2902AB | 100-0 Reverse reading. Dead-point bufferScret-Death buffersScreaksS |
| 2310A-10 | 2310AB-10 | 0-100 continuous tic. Gemstone bearing (with axle rotation counter) 100 continuous |
| 2044A | 2044AB | 0-100 Continuous tic Deathpoint buffer (5 mm) |
| 2044A-09 | 2044AB-09 | 0-100 continuous tic earthquake-proof (5 mm) 100 continuous |
| 2045A | 2045AB | 0-50-0 symmetrical scale. Death point buffer (5 mm) |
The 2 standard pointer table is a classic comparative measurement tool for the detection of spatial errors such as plane, parallel, jump, axle and the proper location of the machine bed and work. The standard scale plate is equipped with 57 mm press circle; surface masked coatings are treated to withstand the damage caused by the pollution; the watchring and watchring are closely fitted with the O-type ring and waterproof oils; the axle and the poles are hot and hot; the stainless steel crown gear is not susceptible to deformation
Precision guarantee: Officially stated as indicator tableVertical position (head-down)Each attached performance report is guaranteed. It allows for the measurement of retroactive management
Guangzhou Yunke Electronics Co., Ltd. supply of Mitutoyo Mitutoyo original bulkware, which provides selection, quotations and post-sale support for the 2 series of indicator forms, and the original plant header, as required The selected type is identified by the measurement process (10 mm or 5 mm), the scale and the back cover form
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.