PHYNIX Surfix easy X E-FN Coating Thickness Gauge (Model SurfixEasyX-E-FN) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. PHYNIX Surfix easy X E-FN external-probe gauge, 50 mm minimum working height, Fe 0-3500 um / NFe 0-3000 um, online statistics, backlit display.
Brand: See datasheet | Category: Thickness Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | Surfix easy X E-FN |
|---|---|
| Series | PHYNIX Surfix easy X Series (a Body Type / external Type) |
| Category | Type external Probe Coating Thickness Gauges(external Fixed Probe) |
| Brand / Origin | Germany PHYNIX(PHYNIX Sensortechnik GmbH, Germany Control ) |
| Measuring Principle | F Part Division Magnetic ; N Part Division Current ; FN Combination Automatic Substrate |
| Probe Type | external Fixed Probe (external, fixed), at at by and Position Measurement |
| Measuring Range | Ferrous / Steel Substrate: 0 ~ 3,500μm; Non- Ferrous Substrate: 0 ~ 3,000μm |
| Accuracy | ±2μm or of reading 2%(whichever is greater) |
| Resolution | 0~1,000μm:1μm;1,000~2,500μm:2μm;2,500~3,500μm:5μm |
| Probe Measure | Hardness () |
| Calibration Method | Calibration, Zero Calibration (Single points Calibration / Zero Adjustment) |
| Statistical Functions | Measured values Quantity, Average, Standard Deviation, Minimum, Maximum |
| Display | with Backlight 4 digits digits Number digits Display, digits Height 8 mm |
| Operating Temperature | 0 ℃ ~ +60 ℃ |
| Surface Temperature | -15 ℃ ~ +60 ℃ |
| Main Unit Dimensions | 110 × 50 × 25 mm |
| Probe Dimensions | Ø 24 mm × 45 mm |
| Weight | 140 g(incl. battery) |
| IP Rating | IP 52(Dustproof, Protection Water) |
| Applicable Standard | DIN、ISO、ASTM、BS |
| Minimum Curvature Radius | Surface 5 mm, Groove Surface 50 mm |
| Minimum Operation Height | 50 mm(E Type external Probe, than I Type 125 mm more Suitable Position) |
| Minimum Measuring Area | 10 × 10 mm |
| Minimum Substrate Thickness | F:0.5 mm;N:50μm |
| Power Supply | 2 cells AAA Battery |
| Supplied Accessories | Main unit (incl. external Probe), Rubber Protection sets, Standard , Zero Standard Foil (Steel / Aluminium), 2 cells AAA Battery, Operating Manual ( / / / in), Manufacturer Certificate, Instrument Case |
| Warranty | 2 years |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The Surfix easy X E-FN is the version with an external fixed probe. Separating probe and instrument makes it especially suitable for hard-to-reach positions: the minimum working height is only 50 mm, compared with 125 mm for the integrated I version, so the probe reaches into narrow spaces, recesses and the inside of structural parts.
Like the I version, the E version ships with calibration-free measurement and is ready to use on switch-on; a single-point calibration (zero adjustment) is available for more demanding conditions. Built-in online statistics show mean, standard deviation and maximum / minimum values immediately, and FN combination models recognise ferrous / steel and non-ferrous substrates automatically.
PHYNIX is the coating thickness gauge brand of PHYNIX Sensortechnik GmbH, based in Neuss, Germany (Siemensstr. 14, D-41469 Neuss). Instruments are developed and built in Germany under a DIN EN ISO 9001 certified quality management system. Across the range the probe tips are made of tungsten carbide for extremely high wear resistance and long service life, and the probe foot carries a V-groove that seats squarely on flat, cylindrical and curved surfaces.
Two measuring principles are used: magnetic induction (DIN EN ISO 2178) for non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron), and the eddy current method (DIN EN ISO 2360) for insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass). FN combination probes identify the substrate and switch principle automatically without operator intervention.
PHYNIX gauges measure non-destructively and are used in electroplating, paint and powder coating, automotive manufacture and appraisal, chemical processing, aerospace, shipbuilding, and quality control of steel structures and heavy-duty corrosion-protection coatings. Switch on and measure — the instruments suit incoming inspection, in-process sampling, final inspection and laboratory work.
Guangzhou Yunke Electronic Co., Ltd. supplies the full PHYNIX range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, calibration foils, high-temperature probe feet, carrying cases) on request. Please ask our engineers to confirm the right probe range and substrate compatibility before ordering.
The specification table above is transcribed from PHYNIX Sensortechnik GmbH official datasheets and product pages; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.