Home › Products

Product Overview

PHYNIX Pocket-Surfix X-FN Coating Thickness Gauge (Model PocketSurfixX-FN) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. PHYNIX Pocket-Surfix X-FN pocket coating thickness gauge, 0-1500 um, 1.5 mm minimum convex radius, 80-reading memory, USB 2.0, automatic substrate recognition.

Brand: See datasheet | Category: Thickness Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

PHYNIX Pocket-Surfix X-FN Coating Thickness Gauge

Technical Specifications

ModelPocket-Surfix X-FN
SeriesPHYNIX Pocket-Surfix X Series (Port Type)
CategoryPort Type a Body Coating Thickness Gauges(built-in Probe)
Brand / OriginGermany PHYNIX(PHYNIX Sensortechnik GmbH, Germany Control )
Measuring PrincipleF Part Division Magnetic ; N Part Division Current ; FN Combination Automatic Ferrous / Non- Ferrous Substrate
Probe Typebuilt-in Type (integrated), Hardness Measurement Tip
Measuring Range0 ~ 1,500μm
Accuracy±(1μm + of reading 1%)
Resolution0.1μm or < of reading 0.2%
Calibration MethodCalibration, Zero Calibration, Calibration; Position (offset) Functions: plus Fixed Value
Statistical FunctionsReading pcs Number, Average, Standard Deviation, Minimum, Maximum
Data Storageup to 80 pcs Measured values
Data TransferUSB 2.0
DisplayLED Backlight, 4 digits digits Number digits, digits Height 8 mm
Operating Temperature0 ℃ ~ +60 ℃
Surface Temperature-15 ℃ ~ +60 ℃
Dimensions110 × 50 × 25 mm
Weight90 g(incl. battery)
IP RatingIP 52(Dustproof, Protection Water)
Applicable StandardDIN、ISO、ASTM、BS
Minimum Curvature RadiusSurface 1.5 mm, Groove Surface 50 mm
Minimum Operation Height125 mm
Minimum Measuring Area10 × 10 mm
Minimum Substrate ThicknessF:0.5 mm;N:50μm
Power Supply2 cells AAA Battery
Supplied AccessoriesMain unit (built-in Probe), Rubber Protection sets, 2 Plate Calibration , Zero Standard Foil (Steel / Aluminium), Portable Case, 2 cells AAA Battery, PHYNIX.connect Transfer Software, Manufacturer Certificate, Operating Manual
Warranty2 years

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The Pocket-Surfix X series is PHYNIX's pocket-size portable range, with an integrated probe and a body small enough to slip into a pocket — ideal for site patrols and quick checks. The tungsten-carbide tip is highly wear-resistant, and the plastic probe foot combines a large contact face with a V-groove so the gauge sits squarely on flat, cylindrical and curved surfaces, avoiding tilt error.

An LED-backlit display stays readable in poor light. All models store readings and transfer them to a PC over USB 2.0. FN models recognise ferrous / steel and non-ferrous substrates automatically.

Key Features

About PHYNIX Coating Thickness Gauges

PHYNIX is the coating thickness gauge brand of PHYNIX Sensortechnik GmbH, based in Neuss, Germany (Siemensstr. 14, D-41469 Neuss). Instruments are developed and built in Germany under a DIN EN ISO 9001 certified quality management system. Across the range the probe tips are made of tungsten carbide for extremely high wear resistance and long service life, and the probe foot carries a V-groove that seats squarely on flat, cylindrical and curved surfaces.

Two measuring principles are used: magnetic induction (DIN EN ISO 2178) for non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron), and the eddy current method (DIN EN ISO 2360) for insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass). FN combination probes identify the substrate and switch principle automatically without operator intervention.

Typical Applications

PHYNIX gauges measure non-destructively and are used in electroplating, paint and powder coating, automotive manufacture and appraisal, chemical processing, aerospace, shipbuilding, and quality control of steel structures and heavy-duty corrosion-protection coatings. Switch on and measure — the instruments suit incoming inspection, in-process sampling, final inspection and laboratory work.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the full PHYNIX range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, calibration foils, high-temperature probe feet, carrying cases) on request. Please ask our engineers to confirm the right probe range and substrate compatibility before ordering.

Specification Sources

The specification table above is transcribed from PHYNIX Sensortechnik GmbH official datasheets and product pages; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.

Related Products

FeaturedPHYNIX PaintCheck FN Coating Thickness Gauge
Thickness Gauges

PHYNIX PaintCheck FN Coating Thickness Gauge

PaintCheckFN
└ PHYNIX (Germany)
FeaturedPHYNIX Surfix easy X E-FN Coating Thickness Gauge
Thickness Gauges

PHYNIX Surfix easy X E-FN Coating Thickness Gauge

SurfixEasyX-E-FN
└ PHYNIX (Germany)
FeaturedPHYNIX Surfix easy X I-FN Coating Thickness Gauge
Thickness Gauges

PHYNIX Surfix easy X I-FN Coating Thickness Gauge

SurfixEasyX-I-FN
└ PHYNIX (Germany)
FeaturedPHYNIX Surfix SX Coating Thickness Gauge
Thickness Gauges

PHYNIX Surfix SX Coating Thickness Gauge

SurfixSX
└ PHYNIX (Germany)
FeaturedPHYNIX Surfix Pro X Coating Thickness Gauge
Thickness Gauges

PHYNIX Surfix Pro X Coating Thickness Gauge

SurfixProX
└ PHYNIX (Germany)
FeaturedFISCHER DUALSCOPE H FMP150 Coating Thickness Gauge
Thickness Gauges

FISCHER DUALSCOPE H FMP150 Coating Thickness Gauge

DUALSCOPE H FMP150
└ Fischer (Germany)