PHYNIX PaintCheck FN Coating Thickness Gauge (Model PaintCheckFN) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. PHYNIX PaintCheck FN entry-level coating thickness gauge, 0-2000 um on steel, calibration-free one-button operation, ideal for car paint and used-car appraisal.
Brand: See datasheet | Category: Thickness Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | PaintCheck FN |
|---|---|
| Series | PHYNIX PaintCheck Series ( Portable ) |
| Category | Type a Body Coating Thickness Gauges(built-in Probe) |
| Brand / Origin | Germany PHYNIX(PHYNIX Sensortechnik GmbH, Germany Control ) |
| Measuring Principle | F Part Division Magnetic (DIN EN ISO 2178); N Part Division Current (DIN EN ISO 2360); Automatic Substrate |
| Probe Type | built-in Type (integrated), Suitable at Flat Installed Surface |
| Measuring Range | Ferrous / Steel Substrate: 0 ~ 2,000μm |
| Accuracy | ±(3μm + of reading 5%) |
| Resolution | 0~1,000μm:1μm;1,000~2,500μm:2μm |
| Calibration Method | Calibration (Output Calibration) |
| Display | 4 digits digits Number digits Display, digits Height 8 mm |
| Operating Temperature | 0 ℃ ~ +60 ℃ |
| Surface Temperature | -15 ℃ ~ +60 ℃ |
| Dimensions | 110 × 50 × 25 mm |
| Weight | 90 g(incl. battery) |
| IP Rating | IP 52(Dustproof, Protection Water) |
| Applicable Standard | DIN、ISO、ASTM、BS |
| Minimum Curvature Radius | Surface 25 mm, Groove Surface 50 mm |
| Minimum Operation Height | 125 mm |
| Minimum Measuring Area | 40 × 40 mm |
| Minimum Substrate Thickness | F:0.75 mm;N:0.25 mm |
| Power Supply | 2 cells AAA Battery |
| Supplied Accessories | Main unit, Rubber Protection sets, Control , Steel Zero Standard Foil, Aluminium Zero Standard Foil, Portable Case, 2 cells AAA Battery, Operating Manual |
| Warranty | 2 years |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PaintCheck is PHYNIX's entry-level portable range, built around a single idea: press one button and measure. It takes fast, non-destructive, accurate readings of paint coatings on ferrous / steel (Fe) and non-ferrous (NFe, e.g. aluminium) substrates. Coating thickness reveals the paint build-up and any body filler or repaint: a reading above the standard thickness, or a widely fluctuating set of readings, points to filler repair or a respray. That makes the instrument a practical way to detect accident damage on a vehicle body.
The PaintCheck FN combines two proven methods — magnetic induction and eddy current — for high accuracy on thin coatings over steel as well as on aluminium and other non-ferrous metals. The measuring principle is selected automatically, so operation stays quick and simple.
PHYNIX is the coating thickness gauge brand of PHYNIX Sensortechnik GmbH, based in Neuss, Germany (Siemensstr. 14, D-41469 Neuss). Instruments are developed and built in Germany under a DIN EN ISO 9001 certified quality management system. Across the range the probe tips are made of tungsten carbide for extremely high wear resistance and long service life, and the probe foot carries a V-groove that seats squarely on flat, cylindrical and curved surfaces.
Two measuring principles are used: magnetic induction (DIN EN ISO 2178) for non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron), and the eddy current method (DIN EN ISO 2360) for insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass). FN combination probes identify the substrate and switch principle automatically without operator intervention.
PHYNIX gauges measure non-destructively and are used in electroplating, paint and powder coating, automotive manufacture and appraisal, chemical processing, aerospace, shipbuilding, and quality control of steel structures and heavy-duty corrosion-protection coatings. Switch on and measure — the instruments suit incoming inspection, in-process sampling, final inspection and laboratory work.
Guangzhou Yunke Electronic Co., Ltd. supplies the full PHYNIX range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, calibration foils, high-temperature probe feet, carrying cases) on request. Please ask our engineers to confirm the right probe range and substrate compatibility before ordering.
The specification table above is transcribed from PHYNIX Sensortechnik GmbH official datasheets and product pages; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.