QNix4200-5mm Thickness Gauges (Model QNix4200-5mm) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. QNix4200-5mm Thickness Gauges — Thickness Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Thickness Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | QNix 4200(5 mm Probe) |
|---|---|
| Series | QNix 4000 Series Coating Thickness Gauges(Automation Dr. Nix, Germany) |
| Category | Type a Body Type Coating Thickness Gauges(Fe Single Management) |
| Brand / Origin | Germany QNix(Automation Dr. Nix GmbH & Co. KG, Germany Control ) |
| Measuring Principle | Fe: Magnetic General Quantity / |
| Probe Type | built-in Type (integrated), Fe Probe 5 mm |
| Measuring Range | Fe:0.0~5000μm |
| Display Unit | μm / mil switchable |
| Display Resolution | 0~999μm: 1μm; 1mm or more: 0.01mm |
| Accuracy | Fe ≤ 1999μm:±(3% + 2μm);Fe ≥ 2000μm:±(5% + 2μm) |
| Measuring Interval | Single times Measurement 850 ms |
| Minimum Measuring Area | Ø 25 mm |
| Minimum Curvature Radius | Surface 5 mm, Groove Surface 25 mm |
| Minimum Substrate Thickness | Fe:0.2 mm |
| Display | Diagram LCD, with Backlight |
| Operating Temperature | 0~50 ℃ |
| Memory Temperature | -10~60 ℃ |
| Power Supply | 2 × 1.5V AA Alkaline Battery |
| Dimensions | 100 × 60 × 27 mm(Length × Width × Height) |
| Weight | 105 g(incl. battery) |
| Applicable Standard | DIN EN ISO 2808、ISO 2178、ASTM B 499、ASTM D 7091 |
| Supplied Accessories | Main unit (built-in Probe), with Standard Foil Instrument Case, 2 × 1.5V AA Alkaline Battery, Detection Certificate, Manual |
| Warranty | 2 years (per Sales records ) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The following table shows the specifications listed in the official data table (Data-) of QNix, and the rest of the population. Data taken from State F.Nix GmbH & Co. KG official, not converted or rewritten
QNix 4200 is a special steel/ iron version of QNix 4500, fully identical to the way it is operated, with only the ability to measure iron magnetic (pe) base material. It is more cost-effective for users who measure only steel and steel-based coatings
Non-destructive measurements apply to such scenes as corrosion-resistant coatings of steel structures, coatings of car car parts, coating of mechanical parts. free of calibration, single-key operation, auto-opener, and maintain high accuracy at all stages
This entry is5 mm probeSpug-TVersion, measuring 0 5000 Xmm, with (3%+2 X qm) The accuracy of the new 2000 — 5000m is (5%+2m); there is also a 3 mm probe version, which is used to create a new system of digital media. The process 0-3000mm. Confirm the required time when selecting a model. Reference: 0, 1999
QNix is the German coating-crowding-crowding brand of State F. Nix GmbH & Co. KG, which is a very important tool for the development of a new technology for the development of the environment.s for the development of a new technology for the development of the environment.s for the development of a new technology for the development of the environment.s for the development of a new technology for the development of the environment.s for the development of a new technology 1968 was founded in Cologne, Germany, in the year of Robert-Perthel-Str. 2, 50739 Köln, and was manufactured for "Made inage" local research and development. Quest The entire series of QNix is designed with no calibration, and is measured only by zero correction on the base or with the standard film, single-key operation, automatic switcher, and is designed to be used for the purpose of monitoring the material. The probe measures the tip of the polishing ruby, is resistant to grinding and protects the measured surface
The measurement is based on two magnetic methods: non-iron magnetic coatings on iron magnetic (pe, for example, steel, iron) using magnetic flux/horse effect methods; and non-iron magnetic metal (e.g., aluminium, zinc, copper, etc.) The insulation of brass and some stainless steel is vortexed. The Dary/Que+none type automatically recognizes the base and changes the principle without the need for manual replacement of the probe
QNix coating thickness gauges are non-destructive measurements and are widely used for vehicle assessment and second-hand car surface testing, industrial and powder coating, corrosion-resistant coatings (steel structures, bridges, storage tanks), Ship preservation and quality control of the feed and delivery. The measurement only takes three steps: "Playing Measurements ", which is suitable for a wide and rapid survey, and for a point-based survey of the narrow space, curvature and fine poles._Faces
Guangzhou Yunke Electronics Co., Ltd. provides selection, quotations, prototype demonstration and post-sale support for a full series of coating measures in QNix, and also provides original plant calibration certificates and accessories (detection, standard film, test plier, instrument kit) as required. If it is necessary to confirm that the specific headcount process is appropriate for the base material, we are welcome to contact them for verification.?
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.