Home › Products

Product Overview

QNix 9500 Premium Coating Thickness Gauge (Model QNix9500Premium) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. QNix 9500 Premium flagship coating thickness gauge, 1,000,000 readings, 100 areas, 2.4-inch IPS-LCD, QN9 software, probes shared with QNix 5500.

Brand: See datasheet | Category: Thickness Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

QNix 9500 Premium Coating Thickness Gauge

Technical Specifications

ModelQNix 9500 Premium
SeriesQNix 9500 Series Coating Thickness Gauges(Automation Dr. Nix, Germany)
CategoryType Coating Thickness Gauges( can Replace Probe, incl. PC Software and Functions)
Brand / OriginGermany QNix(Automation Dr. Nix GmbH & Co. KG, Germany Control )
Measuring PrincipleFe: Magnetic General Quantity / ; NFe: Current
Probe Typecan Replace Probe (Fe / NFe / Dual Probe), and QNix 5500 Standard Probe General-purpose
Measuring RangeFe: 0~5000μm; NFe: 0~5000μm( Probe and Setting)
Measuring Accuracy (Fe)to 2.0 mm: ±(1μm + 2% Reading); 2.0 mm or more: ±3% Reading
Measuring Accuracy (NFe)to 2.0 mm: ±(2μm + 2% Reading); 2.0 mm or more: ±3% Reading
Measuring Speed≥120 times / minutes
Minimum Measuring Surface (Fe / NFe)Ø 14.5 mm
Minimum Curvature Radius ( Surface)Fe: 4 mm; NFe: 6 mm; can 30 mm / 50 mm Calibration
Minimum Substrate ThicknessFe: 25μm; NFe: 100μm; can 20μm / 50μm Calibration
DisplayIPS-LCD, 2.4″, , 600 lm, Reading Angle 70°
Display Rotatable0° / 90° / 180° / 270°, Automatic or Manual
IndicationDisplay Limit Value Indication + Probe Terminal RGB LED Indication
Protection andthree Layer Structure; LCD , (Level H6); Operating Temperature -20~+70 ℃
Zero Adjustment and CalibrationZero correction, 1 points Calibration, 2 points Calibration, Individual(Free Configuration Calibration), Unit internal 10 groups Calibration
Memory Capacity1,000,000 pcs Measured values
Management Management(Jobs): 1 pcs; Region (Areas): 100 pcs; per Region Measuring Point: 10,000 pcs
Limit Value Judgmentcan is per pcs Region Single Setting Limit Value, supports Region Automatic Switching
InterfaceUSB; with QN9 Software (Memory, Analysis, )
Power SupplyBattery Power Supply (Body a Body Meter)
DimensionsMain unit 155 × 65 × 44 mm Quantity class; can Replace Probe Ø 14.5 × 34.5 mm
Probe Weight11.9 g
Applicable StandardDIN EN ISO 2808、DIN 50981、DIN 50984、ISO 2178、BS 5411(3 & 11)、BS 3900-C5、ASTM B 499、ISO 2360、ASTM D 1400、ASTM D 1186、ASTM D 7091
Supplied AccessoriesMain unit, can Replace Probe, Standard Foil, Detection Certificate, Manual, QN9 Software, Portable Case
Warranty2 years (per Sales records )

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The QNix 9500 is QNix's flagship coating thickness gauge, aimed at industrial painting, heavy-duty corrosion protection and surface-treatment work that requires complete measurement documentation and traceability. It handles complex coating systems and provides thorough logging, statistics and reporting.

Accuracy and durability run through the design: high accuracy and repeatability across the full range, convenient calibration on rough, smooth or curved substrates, a three-layer shock-absorbing structure for site knocks, LCD glass rated H6 against scratches and chemicals, and an operating range of -20 to +70 °C. An RGB LED at the probe gives limit feedback right where the operator is looking, without raising the eyes to the screen.

The bright 2.4-inch colour IPS-LCD (600 lm, 70° viewing angle) stays readable in direct sunlight, with automatic or manual brightness and 0° / 90° / 180° / 270° rotation. Large physical keys, a low centre of gravity and a low-fatigue grip support long shifts. The probe is modular and interchangeable, and shares its standard probes with the QNix 5500.

QNix 9500 Premium — Added Functions

The comparison below covers the three QNix 9500 versions (Basic / Premium / Premium+) and is taken from the feature table in the official 9500Prospekt brochure (2026 edition).

The Premium version extends the Basic specification substantially. Memory grows to 1,000,000 measured values, with 100 areas under 1 job and 10,000 spots per area; jobs and area settings can be switched and copied. New functions include combined measurement (Fe and NFe coating readings from a single measurement), continuous measurement, delayed precision measurement (the reading is taken shortly after placement), key-triggered measurement, PIN protection, custom hotkeys and Individual free-configurable calibration with 10 calibration sets stored in the instrument. Limits can be set per area and switch automatically, with LED pass / fail indication. Accuracy to 2.0 mm is ±(1 μm + 2% of reading) on Fe and ±(2 μm + 2% of reading) on NFe.

The Premium version does not include the ISO 19840 and SSPC PA2 zero-offset / 2-point calibration, nor the dedicated limit modes for ISO 19840, SSPC PA2 (80/120, levels 1–5) and IMO PSPC (90/10).

About QNix Coating Thickness Gauges

QNix is the coating thickness gauge brand of Automation Dr. Nix GmbH & Co. KG, founded in 1968 in Cologne, Germany (Robert-Perthel-Str. 2, 50739 Köln). Every instrument is developed and manufactured in Germany, tested individually in the company's own laboratory before dispatch and supplied with a test certificate. The whole QNix range uses a calibration-free design: a zero adjustment on the uncoated substrate or on the supplied reference plate is all that is needed before measuring. One-button operation and automatic switch-on / switch-off are standard, and the polished ruby probe tip is wear-resistant and protects the coated surface.

Two measuring principles are used. Non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron) are measured by the magnetic flux / Hall-effect method; insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass and some stainless steels) are measured by the eddy current method. Dual-probe (Fe+NFe) models recognise the substrate automatically and switch principle without any probe change.

Typical Applications

QNix gauges measure non-destructively and are widely used for vehicle appraisal and used-car paint inspection, industrial painting and powder coating, heavy-duty corrosion protection (steel structures, bridges, storage tanks), marine anti-corrosion work, and incoming and outgoing quality control. A reading takes only three steps — place, measure, read — which suits both rapid surveys over large areas and repeat checks in confined spaces, on curved surfaces and on thin rods.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the full QNix range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, test foils, carrying cases) on request. If you need to confirm the exact probe range and substrate compatibility for a specific job, please ask our engineers to check it with you.

Specification Sources

The specification table above is transcribed from the official QNix 9500 datasheet published by Automation Dr. Nix GmbH & Co. KG; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration, the QN9 software or an optional factory calibration certificate, please contact our engineers.

Related Products

QNix9500PremiumPlus Thickness Gauges
Thickness Gauges

QNix9500PremiumPlus Thickness Gauges

QNix9500PremiumPlus
└ QNIX (Germany)
FeaturedQNix 9500 Basic Coating Thickness Gauge
Thickness Gauges

QNix 9500 Basic Coating Thickness Gauge

QNix9500Basic
└ QNIX (Germany)
FeaturedQNix 5500 Coating Thickness Gauge
Thickness Gauges

QNix 5500 Coating Thickness Gauge

QNix5500
└ QNIX (Germany)
FeaturedQNix 4600 Coating Thickness Gauge
Thickness Gauges

QNix 4600 Coating Thickness Gauge

QNix4600
└ QNIX (Germany)
QNix4200-5mm Thickness Gauges
Thickness Gauges

QNix4200-5mm Thickness Gauges

QNix4200-5mm
└ QNIX (Germany)
QNix4200-3mm Thickness Gauges
Thickness Gauges

QNix4200-3mm Thickness Gauges

QNix4200-3mm
└ QNIX (Germany)