QNix 4600 Coating Thickness Gauge (Model QNix4600) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. QNix 4600 coating thickness gauge with 2-inch auto-rotating colour IPS-LCD, over 100 readings per minute, batch statistics, Fe or Fe/NFe probe options.
Brand: See datasheet | Category: Thickness Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | QNix 4600 |
|---|---|
| Series | QNix 4000 Series Coating Thickness Gauges(Automation Dr. Nix, Germany) |
| Category | Type Coating Thickness Gauges(2″ Rotatable Display) |
| Brand / Origin | Germany QNix(Automation Dr. Nix GmbH & Co. KG, Germany Control ) |
| Measuring Principle | Fe Version This: Magnetic / ; Dual Probe Version This: with Current (NFe) |
| Probe Type | built-in Type, optional Fe Single Probe or Fe / NFe Dual Probe |
| Measuring Range | Fe: 0~5000μm; NFe(Dual Probe Version): 0~5000μm |
| Measuring Speed | >100 times / minutes |
| Display | 2″ IPS-LCD, 350 cd / m², Automatic Rotatable (0° / 90° / 180° / 270°) |
| Statistical Functions | Average, Standard Deviation, Maximum, Minimum |
| Substrate Recognition | Automatic (only Dual Probe Version This) |
| Temperature Compensation | Probe built-in Temperature Compensation, Full Range Hold Height Accuracy |
| Operating Temperature | 0~50 ℃ |
| Operation Method | Single Key Operation: Open Unit → Position → Reading |
| Meter | Low Weight + Large Contact Bottom Surface, Accuracy , minus Measurement Error |
| Supplied Accessories | Main unit, Fe and NFe Standard Foil, Calibration Certificate, Manual, 2 × AA Battery, Portable Instrument Case |
| Applicable Standard | Compliant with Coating Measure Thickness Phase Standard (DIN EN ISO 2808, ISO 2178, ISO 2360 etc.) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The QNix 4600 is built for high-volume measurement in industrial coating shops and vehicle appraisal, giving fast, accurate coating thickness readings on powder coatings and wet films alike.
Its 2-inch colour LCD rotates the display automatically, so the reading stays upright even when the gauge is held upside down, and remains legible under difficult lighting. The screen shows running statistics — mean, standard deviation, maximum and minimum — giving a complete picture of the current batch at a glance. A measuring speed of more than 100 readings per minute suits large inspection lots.
The compact, ergonomic body follows a simple one-button sequence: switch on, place, read. A low centre of gravity and a large contact face keep the instrument seated squarely and reduce measurement error, while temperature compensation inside the probe maintains accuracy across the full range. Choose an Fe single-probe version or an Fe/NFe dual-probe version; the dual version recognises the substrate automatically.
If you need to measure on non-ferrous substrates such as aluminium or zinc, order the dual-probe (Dual) version. For steel / iron substrates only, the Fe version is sufficient. Please confirm the version with our engineers before ordering.
QNix is the coating thickness gauge brand of Automation Dr. Nix GmbH & Co. KG, founded in 1968 in Cologne, Germany (Robert-Perthel-Str. 2, 50739 Köln). Every instrument is developed and manufactured in Germany, tested individually in the company's own laboratory before dispatch and supplied with a test certificate. The whole QNix range uses a calibration-free design: a zero adjustment on the uncoated substrate or on the supplied reference plate is all that is needed before measuring. One-button operation and automatic switch-on / switch-off are standard, and the polished ruby probe tip is wear-resistant and protects the coated surface.
Two measuring principles are used. Non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron) are measured by the magnetic flux / Hall-effect method; insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass and some stainless steels) are measured by the eddy current method. Dual-probe (Fe+NFe) models recognise the substrate automatically and switch principle without any probe change.
QNix gauges measure non-destructively and are widely used for vehicle appraisal and used-car paint inspection, industrial painting and powder coating, heavy-duty corrosion protection (steel structures, bridges, storage tanks), marine anti-corrosion work, and incoming and outgoing quality control. A reading takes only three steps — place, measure, read — which suits both rapid surveys over large areas and repeat checks in confined spaces, on curved surfaces and on thin rods.
Guangzhou Yunke Electronic Co., Ltd. supplies the full QNix range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, test foils, carrying cases) on request. If you need to confirm the exact probe range and substrate compatibility for a specific job, please ask our engineers to check it with you.
The specification table above is transcribed from the official QNix datasheet published by Automation Dr. Nix GmbH & Co. KG; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time, a demonstration, an English datasheet or an optional factory calibration certificate, please contact our engineers.