Home › Products

Product Overview

QNix 1500 Coating Thickness Gauge (Model QNix1500) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. QNix 1500 integrated coating thickness gauge, Fe/NFe 0-5000 um, magnetic flux / Hall effect plus eddy current, calibration-free one-button operation.

Brand: See datasheet | Category: Thickness Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

QNix 1500 Coating Thickness Gauge

Technical Specifications

ModelQNix 1500
SeriesQNix 1500 Coating Thickness Gauges(Automation Dr. Nix, Germany)
CategoryType a Body Type Coating Thickness Gauges(Fe / NFe Dual Probe)
Brand / OriginGermany QNix(Automation Dr. Nix GmbH & Co. KG, Germany Control )
Measuring PrincipleFe: Magnetic General Quantity / ; NFe: Current
Probe Typebuilt-in Type (integrated), Dual Probe
Measuring RangeFe:0.0~5000μm;NFe:0.0~5000μm
Resolution0.0~99.9μm:0.1μm;100~999μm:1μm;1.00~5.00mm:0.01mm
Accuracy0.00~999μm: ±(1μm + 2%); 1~5mm: ±3.5%(Percent is Reading Percent)
Display Unitμm / mil switchable
Measuring IntervalSingle times Measurement 1250 ms
Minimum Measuring Area10 × 10 mm
Minimum Curvature RadiusSurface 5 mm, Groove Surface 25 mm
Minimum Substrate ThicknessFe:0.2 mm;NFe:0.05 mm
DisplayNumber digits LCD Dual Surface Display
Operating Temperature0~50 ℃
Memory Temperature-10~60 ℃
Power Supply1 × 9V Method Battery (Alkaline)
Dimensions166 × 64 × 34 mm(Length × Width × Height)
WeightApprox. 150 g(incl. battery)
Applicable StandardDIN EN ISO 2808、DIN 50981、DIN 50984、ISO 2178、BS 5411(3 & 11)、BS 3900-C5、ASTM B 499、ISO 2360、ASTM D 1400、ASTM D 1186、ASTM D 7091
Supplied AccessoriesMain unit, 9V Alkaline Battery, with Standard Foil Instrument Case, Calibration Certificate, Manual
Warranty2 years (per Sales records )

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The QNix 1500 is the classic instrument in the QNix coating thickness gauge range and a long-standing tool in vehicle appraisal and paint inspection. Its flat housing reaches positions that bulkier gauges cannot, which makes it well suited to fast surveys over large panels — a familiar choice for used-car assessors, dealers and appraisers.

The measuring range extends to 5000 μm. Two independently operating built-in probes distinguish ferrous (Fe: steel / iron) from non-ferrous (NFe: aluminium, copper, zinc) substrates automatically, so there is no probe to change and no range to select. A three-point support keeps the gauge steady for repeatable readings, and a V-groove in the base allows stable measurements on shafts and small rods.

Key Features

About QNix Coating Thickness Gauges

QNix is the coating thickness gauge brand of Automation Dr. Nix GmbH & Co. KG, founded in 1968 in Cologne, Germany (Robert-Perthel-Str. 2, 50739 Köln). Every instrument is developed and manufactured in Germany, tested individually in the company's own laboratory before dispatch and supplied with a test certificate. The whole QNix range uses a calibration-free design: a zero adjustment on the uncoated substrate or on the supplied reference plate is all that is needed before measuring. One-button operation and automatic switch-on / switch-off are standard, and the polished ruby probe tip is wear-resistant and protects the coated surface.

Two measuring principles are used. Non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron) are measured by the magnetic flux / Hall-effect method; insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass and some stainless steels) are measured by the eddy current method. Dual-probe (Fe+NFe) models recognise the substrate automatically and switch principle without any probe change.

Typical Applications

QNix gauges measure non-destructively and are widely used for vehicle appraisal and used-car paint inspection, industrial painting and powder coating, heavy-duty corrosion protection (steel structures, bridges, storage tanks), marine anti-corrosion work, and incoming and outgoing quality control. A reading takes only three steps — place, measure, read — which suits both rapid surveys over large areas and repeat checks in confined spaces, on curved surfaces and on thin rods.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the full QNix range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, test foils, carrying cases) on request. If you need to confirm the exact probe range and substrate compatibility for a specific job, please ask our engineers to check it with you.

Specification Sources

The specification table above is transcribed from the official QNix datasheet published by Automation Dr. Nix GmbH & Co. KG; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration, an English datasheet or an optional factory calibration certificate, please contact our engineers.

Related Products

QNix9500PremiumPlus Thickness Gauges
Thickness Gauges

QNix9500PremiumPlus Thickness Gauges

QNix9500PremiumPlus
└ QNIX (Germany)
FeaturedQNix 9500 Premium Coating Thickness Gauge
Thickness Gauges

QNix 9500 Premium Coating Thickness Gauge

QNix9500Premium
└ QNIX (Germany)
FeaturedQNix 9500 Basic Coating Thickness Gauge
Thickness Gauges

QNix 9500 Basic Coating Thickness Gauge

QNix9500Basic
└ QNIX (Germany)
FeaturedQNix 5500 Coating Thickness Gauge
Thickness Gauges

QNix 5500 Coating Thickness Gauge

QNix5500
└ QNIX (Germany)
FeaturedQNix 4600 Coating Thickness Gauge
Thickness Gauges

QNix 4600 Coating Thickness Gauge

QNix4600
└ QNIX (Germany)
QNix4200-5mm Thickness Gauges
Thickness Gauges

QNix4200-5mm Thickness Gauges

QNix4200-5mm
└ QNIX (Germany)