Home › Products

Product Overview

QNix 4500 Coating Thickness Gauge (Model QNix4500) is a Thickness Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. QNix 4500 integrated coating thickness gauge, Fe 0-5000 um / NFe 0-3000 um, backlit graphic LCD, calibration-free, 105 g, for automotive paint and industrial coating.

Brand: See datasheet | Category: Thickness Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

QNix 4500 Coating Thickness Gauge

Technical Specifications

ModelQNix 4500
SeriesQNix 4000 Series Coating Thickness Gauges(Automation Dr. Nix, Germany)
CategoryType a Body Type Coating Thickness Gauges(Fe / NFe Dual Probe)
Brand / OriginGermany QNix(Automation Dr. Nix GmbH & Co. KG, Germany Control )
Measuring PrincipleFe: Magnetic General Quantity / ; NFe: Current
Probe Typebuilt-in Type (integrated), Dual Probe; optional 3 / 3 mm or 5 / 3 mm
Measuring RangeFe:0.0~5000μm;NFe:0.0~3000μm
Display Unitμm / mil switchable
Display Resolution0~999μm: 1μm; 1mm or more: 0.01mm
AccuracyFe ≤ 1999μm:±(3% + 2μm);Fe ≥ 2000μm:±(5% + 2μm);NFe ≤ 1999μm:±(3% + 2μm);NFe ≥ 2000μm:±(5% + 2μm)
Measuring IntervalSingle times Measurement 850 ms
Minimum Measuring AreaØ 25 mm
Minimum Curvature RadiusSurface 5 mm, Groove Surface 25 mm
Minimum Substrate ThicknessFe:0.2 mm;NFe:0.05 mm
DisplayDiagram LCD, with Backlight
Operating Temperature0~50 ℃
Memory Temperature-10~60 ℃
Power Supply2 × 1.5V AA Alkaline Battery
Dimensions100 × 60 × 27 mm(Length × Width × Height)
Weight105 g(incl. battery)
Applicable StandardDIN EN ISO 2808, ISO 2178, ASTM B 499, ASTM D 7091, ISO 2360(only QNix 4500)
Supplied AccessoriesMain unit (built-in Probe, per Setting Range), with Standard Foil Instrument Case, 2 × 1.5V AA Alkaline Battery, Detection Certificate, Manual
Warranty2 years (per Sales records )

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The QNix 4500 is QNix's best-selling general-purpose model, covering a wide range of tasks in the automotive and coating industries. The compact, rugged housing measures paint and corrosion-protection coatings non-destructively on ferrous (Fe: steel / iron) as well as on non-ferrous metals (NFe: aluminium, zinc, copper, brass).

The probe is built in, and a key press switches between the two measuring methods. The calibration-free design holds its accuracy across the full range: Fe 0–5000 μm and NFe 0–3000 μm. The backlit graphic LCD shows the reading, battery status, operating mode and serial number, and an audible signal confirms each completed measurement — useful when working in poor light.

Key Features

About QNix Coating Thickness Gauges

QNix is the coating thickness gauge brand of Automation Dr. Nix GmbH & Co. KG, founded in 1968 in Cologne, Germany (Robert-Perthel-Str. 2, 50739 Köln). Every instrument is developed and manufactured in Germany, tested individually in the company's own laboratory before dispatch and supplied with a test certificate. The whole QNix range uses a calibration-free design: a zero adjustment on the uncoated substrate or on the supplied reference plate is all that is needed before measuring. One-button operation and automatic switch-on / switch-off are standard, and the polished ruby probe tip is wear-resistant and protects the coated surface.

Two measuring principles are used. Non-magnetic coatings on ferromagnetic substrates (Fe: steel, iron) are measured by the magnetic flux / Hall-effect method; insulating coatings on non-ferrous metals (NFe: aluminium, zinc, copper, brass and some stainless steels) are measured by the eddy current method. Dual-probe (Fe+NFe) models recognise the substrate automatically and switch principle without any probe change.

Typical Applications

QNix gauges measure non-destructively and are widely used for vehicle appraisal and used-car paint inspection, industrial painting and powder coating, heavy-duty corrosion protection (steel structures, bridges, storage tanks), marine anti-corrosion work, and incoming and outgoing quality control. A reading takes only three steps — place, measure, read — which suits both rapid surveys over large areas and repeat checks in confined spaces, on curved surfaces and on thin rods.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the full QNix range with selection advice, quotations, demonstrations and after-sales support, and can provide factory calibration certificates and accessories (probes, reference plates, test foils, carrying cases) on request. If you need to confirm the exact probe range and substrate compatibility for a specific job, please ask our engineers to check it with you.

Specification Sources

The specification table above is transcribed from the official QNix datasheet published by Automation Dr. Nix GmbH & Co. KG; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration, an English datasheet or an optional factory calibration certificate, please contact our engineers.

Related Products

QNix9500PremiumPlus Thickness Gauges
Thickness Gauges

QNix9500PremiumPlus Thickness Gauges

QNix9500PremiumPlus
└ QNIX (Germany)
FeaturedQNix 9500 Premium Coating Thickness Gauge
Thickness Gauges

QNix 9500 Premium Coating Thickness Gauge

QNix9500Premium
└ QNIX (Germany)
FeaturedQNix 9500 Basic Coating Thickness Gauge
Thickness Gauges

QNix 9500 Basic Coating Thickness Gauge

QNix9500Basic
└ QNIX (Germany)
FeaturedQNix 5500 Coating Thickness Gauge
Thickness Gauges

QNix 5500 Coating Thickness Gauge

QNix5500
└ QNIX (Germany)
FeaturedQNix 4600 Coating Thickness Gauge
Thickness Gauges

QNix 4600 Coating Thickness Gauge

QNix4600
└ QNIX (Germany)
QNix4200-5mm Thickness Gauges
Thickness Gauges

QNix4200-5mm Thickness Gauges

QNix4200-5mm
└ QNIX (Germany)